Abstract:Abstract Gas turbines and aircraft engines are dominated by cyclic operating modes with fatigue-related loads. This may result in the acceleration of damage development on the components. Critical components of turbine blades and discs are exposed to cyclic thermal and mechanical multi-axial fatigue. In the current work, planar-biaxial Low-Cycle-Fatigue (LCF) tests are conducted using cruciform specimens at different test temperatures. The influence on the deformation and lifetime behaviour of the nickel-base disk alloy Inconel 718 is investigated at selected cyclic proportional loading cases, namely shear and equi-biaxial. The calculation of the stress and strain distribution of the cruciform specimens from the experimental data is difficult to obtain due to complex geometry and temperature gradients. Therefore, there is a need for Finite Element (FE) Simulations. A viscoplastic material model is considered to simulate the material behaviour subjected to uniaxial and the selected planar-biaxial loading conditions. At first, uniaxial simulation results are compared with the uniaxial experiment results for both batches of IN718. Then, the same material parameters are used for simulating the biaxial loading cases. The prediction of FE simulation results is in good agreement with the experimental LCF test for both shear and equi-biaxial loadings. The equivalent stress amplitude results of the biaxial simulation are compared with the uniaxial results. Furthermore, the lifetime is calculated based on the stabilized cycle from the simulation and by using Crossland and Sines multi-axial stress-based approaches. The Crossland model predicts fatigue life significantly better than the Sines model. Finally, the simulated lifetime results are compared with the experimental lifetime.

Multi-scale analysis and experimental research for turbine guide vanes made of 2D braided SiCf/SiC composites in high-cycle fatigue regime

A Hybrid Modeling Method of Fatigue Crack Growth for Gas Turbine Blades under Combined High and Low Cycle Fatigue Loadings

Calculation of Finite Element of Thermal Stress and Analysis of Low-cyclic Fatigue Life for Non-central Hole Rotor of 135 MW Turbine

Fatigue Crack Propagation Analysis in an Aero-Engine Turbine Disc Using Computational Methods and Spin Test

Experimental investigation and multiscale simulation on the bending fatigue of SiCf/SiC composite vanes

Experimental investigation and multiscale simulation on the bending fatigue of 2D SiCf/SiC composites

Degradation analysis on high-cycle bending fatigue for woven SiC/SiC composites based on Wiener process model

Experimental and Numerical Investigation of High-Temperature Multi-Axial Fatigue

A Novel Creep-Fatigue Life Evaluation Method for Ceramic-Composites Components

Prediction of long-term fatigue life of CFRP composite hydrogen storage vessel based on micromechanics of failure

A Virtual Scale Approach to Multi-Scale Calculations and Its Application in Fiber-Reinforced Composites

Multiaxial Fatigue Life Prediction For Turbine Blades Using Finite Element Analysis

An Efficient Multi-Scale Method for Failure Mechanism Analysis of SiCf/Ti Composites with Experimental Validation

Multiaxial creep–fatigue failure mechanism and life prediction of a turbine blade based on a unified numerical solution approach

Multi-scale Progressive Damage and Failure Behavior Analysis of Three-Dimensional Winding SiC Fiber-Reinforced SiC Matrix Composite Tube

Failure assessment of braided ceramic matrix composite dovetail turbine blade under thermo-mechanical load

Multi-Scale Prediction of Thermal and Mechanical Properties of C/SiC Braided Composites

Fatigue Analysis And Lifetime Estimation Of Centrifugal Compressor Impeller Blades

Reliability-based Low-Cycle Fatigue Damage Analysis for Turbine Blade with Thermo-Structural Interaction

Multiscale Modeling of SiCf/SiC Nuclear Fuel Cladding Based on FE-Simulation of Braiding Process

Fatigue life prediction considering individual modulus for unidirectional needled C/SiC composites under variable amplitude loading