Abstract:Phosphogypsum (PG) is a kind of industrial solid waste with high impurity content and low utilization rate. In this study, α-hemihydrate gypsum (α-HH) was synthesized from PG in H3PO4–H2O solution (wet-process phosphoric acid solution and phosphoric acid solution) under atmospheric pressure. The crystal morphology of α-HH was controlled by adding F and Al compound regulators, and the mechanical properties of α-HH were improved. The difference of α-HH synthesized by PG with different qualities was analyzed, and the mechanism of α-HH morphology was studied by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and energy-dispersive spectroscopy (EDS). Results showed that in the wet-process phosphoric acid solution, α-HH synthesized from white PG (by H3PO4–H2SO4 two-step method) had better whiteness, purity, and mechanical properties compared with that from industrial PG, and the performance indexes of the α-HH products met the requirements of α50 grade in JC/T 2038–2010 α-high-strength gypsum in China and have a good commercial application prospect. Moreover, in the phosphoric acid solution, the average diameter of the α-HH crystal increased from 8.1 µm to 54.8 µm, the average aspect (L/D) ratio decreased from 32.65 to 0.52, and the induction period and growth period of the α-HH crystal were prolonged with the increase in regulator dosage. F− and Al3+ ions were preferred to adsorb on the crystal faces. The growth of the crystal parallel to c-axis (200), (020), and (400) was inhibited, and the morphology of the α-HH crystal changed from whisker to short column. When the dosage of the regulator was 1.1 %, the 2 h bending strength of the α-HH product was 6.56 MPa, and the drying compressive strength was 52.4 MPa. This study provides a new technique and method for the synthesis of high-strength α-HH products from PG.

Deep decalcification of factory-provided freezing acidolysis solution to achieve α-high-strength gypsum

Deep removal of phosphorus and synchronous preparation of high-strength gypsum from phosphogypsum by crystal modification in NaCl-HCl solutions

Trace NaCl and Na2EDTA Mediated Synthesis of Α-Calcium Sulfate Hemihydrate in Glycerol–Water Solution

Effect Of Potassium Sodium Tartrate And Sodium Citrate On The Preparation Of Alpha-Calcium Sulfate Hemihydrate From Flue Gas Desulfurization Gypsum In A Concentrated Electrolyte Solution

New process for phosphorus removal with the combination of biological medium addition and calcium hydroxyphosphate crystallization

Coordinated disposal of FGD gypsum and power plant concentrated brine via preparation of α-hemihydrate gypsum

Facile preparation of high-strength α-CaSO4·0.5H2O regulated by maleic acid from phosphogypsum: experimental and molecular dynamics simulation studies

Efficient removal of impurities from phosphogypsum during preparation of α-hemihydrate gypsum

Preparation of calcium carbonate by indirect carbonation desulfurization gypsum with renewable aspartic acid

Utilization of phosphogypsum to synthesize α-hemihydrate gypsum in H3PO4–H2O solution

Experimental Study and Mechanism Analysis of Preparation of α-Calcium Sulfate Hemihydrate from FGD Gypsum with Dynamic Method

Efficient extraction of impurities from phosphogypsum during crystal regulation of α‐hemihydrate gypsum

Study on Preparation of High-Strength Gypsum by FGD Gypsum

A Novel Neutralization Process for Improving Dehydration Performance of Industrial By-Product Gypsum

α-calcium sulfate hemihydrate preparation from FGD gypsum in recycling mixed salt solutions

Research on the technology and mechanism of direct acidification of phosphogypsum and deeply solidify impurities with lime

Facile preparation of α-calcium sulfate hemihydrate whisker from by-product gypsum in chloride-free salt solution system

Obtaining nano calcium fluoride and ammonium sulfate from phosphogypsum

Effect of mixed cation acetate electrolyte on synthesis of α‐hemihydrate gypsum from phosphogypsum

High-Efficiency Purification and Morphology Regulation of CaSO4·2H2O Crystals from Phosphogypsum