Abstract:A differential ring voltage‐controlled oscillator (DRVCO) is proposed as a critical block in communication systems, employing Wu active inductors for the first time to achieve low noise, wide tuning range, and low power consumption. Designed in 180 nm CMOS technology, it operates at 2.745 GHz with a tuning range of 2.15 GHz, consuming 1.99 mW. The phase noise is −91.2 dBc/Hz at 1 MHz offset, with a FoM of −156.9 dBc/Hz, covering 0.00072 mm2. A differential ring voltage‐controlled oscillator (DRVCO) is proposed in this paper as one of the critical blocks in communication systems. It consists of four stages of delay cells connected in a chain, creating a ring structure with auxiliary path interconnections. The oscillation frequency of the DRVCO can be controlled by adjusting the tuning voltage that controls the charging current. To achieve the desired performance for wireless applications, the Wu active inductor, which is a low‐noise and high‐quality factor active inductor, is employed in each delay cell for the first time. Using an active inductor provides a wide tuning range and also allows for proper phase noise and low power consumption. The proposed circuit is designed and simulated using standard 180‐nm CMOS technology with a 1.8‐V voltage source (VDD). The circuit is designed to achieve a tuning range of 2.15 GHz with a center frequency oscillation of 2.745 GHz, over the control voltage variation of 1.4 V (0 to 1.4 V). To achieve the desired performance, the circuit consumes an average power of 1.99 mW. It achieves a phase noise of − 91.2 dBc/Hz at 1 MHz offset frequency, indicating effective noise suppression. The figure of merit (FoM) for the circuit is − 156.9 dBc/Hz, representing its overall performance. The final layout of the circuit estimates an area of 0.00072 mm2. Various analyses, including Monte–Carlo simulations, PVT (process, voltage, temperature) variation analysis, and other relevant analyses, have been performed to ensure the reliable performance of the proposed circuit.

Low power Controlled Ring Oscillator with Complementary Drain Capacitance (CRO-CDC) for UWB Applications

A Low- Power CMOS Ring- Based Oscillator Using Current Steering Logic Structure

Design and optimization of the ring oscillator based injection locked frequency dividers.

A Low Power Sub-GHz PLL with Optimized Class-C Voltage-controlled Oscillator

A Low Power V-Band CMOS Frequency Divider with Wide Locking Range and Accurate Quadrature Output Phases.

An Area-Efficient CRLH (composite Right/Left-Handed)-TL Approach to the Design of Rotary Traveling-Wave Oscillator

A 4 to 5ghz Digitally Controlled Ring Oscillator with 100khz Resolution Using Noise Cancellation Technology in 40nm CMOS.

A Low-Power Ring Oscillator Using Pull-Up Control Scheme Integrated by Metal–Oxide TFTs

A 2.7-Ghz Digitally-Controlled Ring Oscillator with Supply Sensitivity of 0.0014%-Fdco/1%-vdd Using Digital Current-Regulated Tuning.

A low-phase-noise 900-MHz CMOS ring oscillator with quadrature output

A 50μW Ring-Type Complementary Inverse-Class-D Oscillator with 191.4dBc/Hz FoM and 205.6dBc/Hz FoM<inf>A</inf>

A 50μw Ring-Type Complementary Inverse-Class-D Oscillator with 191.4dbc/hz FoM and 205.6dbc/hz FoMA

A wide tuning range CMOS differential ring VCO using an active inductor for wireless applications

A Multi-Path Gated Ring Oscillator Based Time-To-Digital Converter In 65 Nm Cmos Technology

A Time-Domain Digitally Controlled Oscillator Composed of a Free Running Ring Oscillator and Flying-Adder

A Current Steering Logic Based Ring Oscillator For High Stability And Lower Noise Applications

A 0.35–0.5-V 18–152 MHz Digitally Controlled Relaxation Oscillator with Adaptive Threshold Calibration in 65-Nm CMOS

Characterization of Reliabilities of 22 Nm UTBB FDSOI Ring Oscillators

Low-power Scaling-friendly Ring Oscillator based ΔΣ ADC.

CMOS Voltage-Controlled Oscillator with Complementary and Adaptive Overdrive Voltage Control Structures

SCALLER: Standard Cell Assembled and Local Layout Effect-based Ring Oscillators