Abstract:Ring oscillators (ROs) serve as basic building blocks in a lot of application scenarios, where they must ensure high reliability, flexibility, and low-area/energy footprint. With the recent advances of the Internet-of-Things (IoT) technology, in particular, the necessity to endow interconnected devices with security facilities has increased as well. In this context, the efficient implementation of ROs on field-programmable gate arrays (FPGAs) is crucial, even though it hides some pitfalls. This article presents a new design strategy for multistage ROs relying on the carry chains (CCs) available into modern FPGA devices. Several configurations of ROs designed as proposed here have been characterized in terms of hardware costs, jitter, and temperature/voltage sensitivity. In all the evaluated cases, the proposed design allows to achieve predictable routing schemes through the automatic place and route (P&R), while reducing slice occupancy and energy consumption by up to 50% and 44%, respectively, in comparison with the traditional lookup table (LUT)-based ROs. When realized on a Artix-7 device, the basic version of the proposed oscillator realized using 33 inverting stages allows obtaining multiphase outputs oscillating at 29.7 MHz with a standard deviation less than 10 kHz. The analysis conducted also demonstrates the high flexibility of the novel circuits, such as the possibility to easily change their behavior depending on the target application requirements. As an example, by exploiting additional pass-through elements, the proposed scheme achieves a sensitivity of 49 kHz/°C that is more than 4 times higher than that shown by the corresponding traditional LUT-based competitor, thus making it more suitable for thermal monitoring applications.

SCALLER: Standard Cell Assembled and Local Layout Effect-based Ring Oscillators

Design and optimization of the ring oscillator based injection locked frequency dividers.

Design And Automatic Generation Of Area-Efficient Ring Oscillator Based Addressable Test Chips

An Area-Efficient CRLH (composite Right/Left-Handed)-TL Approach to the Design of Rotary Traveling-Wave Oscillator

A Two-stage VCO With Extra Wide Tuning Range

Exploring the Usage of Fast Carry Chains to Implement Multistage Ring Oscillators on FPGAs: Design and Characterization

Broadband Linearity Enhancement Method for a 1.3 GHz-2.5 GHz Digitally-Assisted Oscillator in a 55-Nm CMOS Technology

Linearity Enhancement Method for a Wide-Band Digitally Controlled Oscillator

1–2 GHz 2 mW injection-locked ring oscillator based phase shifter in 0.18 µm CMOS technology

A K-Band CMOS Standing Wave Oscillator Using Digital-Controlled Artificial Dielectric Differential Transmission Lines

Low power Controlled Ring Oscillator with Complementary Drain Capacitance (CRO-CDC) for UWB Applications

Characterization of Reliabilities of 22 Nm UTBB FDSOI Ring Oscillators

High-Speed Ring Oscillator Using Skewed Delay Scheme Integrated by Metal-Oxide TFTs

Optoelectronic Oscillator Based on a Silicon Microring Modulator

Low-power Scaling-friendly Ring Oscillator based ΔΣ ADC.

A Low-Noise Multi-GHz CMOS Multiloop Ring Oscillator With Coarse and Fine Frequency Tuning

Closed-Loop, Nonlinearity Analysis And Design Of Dual Tuning, Different Control, High Fom Two Stage Ring Oscillator

Low-Power Scaling-Friendly Ring Oscillator Based Delta Sigma Adc

A Low-Power Ring Oscillator Using Pull-Up Control Scheme Integrated by Metal–Oxide TFTs

A Scaling Compatible, Synthesis Friendly VCO-based Delta-Sigma ADC Design and Synthesis Methodology

Crossover Ring Oscillator Puf