Abstract:Ceramic materials are highly regarded for their exceptional chemical and mechanical stability; however, their inherent brittleness limits their resistance to impact fractures. Researchers have investigated the design of biomimetic ceramic structures to overcome this problem, demonstrating the ability to toughen ceramics and expand their applications. However, the complexity of these structures makes the implementation of traditional processing methods challenging. To address this problem, a new preparation method for high-strength and high-toughness biomimetic ceramic structures is proposed. First, the primitive structure with the best mechanical performance was selected as the experimental object. Second, the vat photopolymerization printing process was optimized; further, primitive structures were designed with different wall thicknesses to investigate the effects of graded and variable-graded structures on the performance of triply periodic minimal surface structures. Finally, a polymer was used to impregnate the ceramic parts to prepare biomimetic structures. In the experiments, the biomimetic structures outperformed their pure ceramic counterparts in terms of toughness and avoided catastrophic failure. In particular, when the ceramic had graded structures, the energy absorption capability of the part increased by 202%. Finite-element modeling was used to analyze the stress concentration and distribution. Peridynamic simulations provided insights into the strengthening and toughening mechanisms at the micro level and guidance for developing damage-resistant, high-energy-absorbing materials.

Mechanical properties of biomimetic ceramic with Bouligand architecture

Fabrication method and mechanical properties of biomimetic Cf/ZrB2-SiC ceramic composites with bouligand structures

Biomimetic high toughness Si3N4 ceramics with inverse-bouligand structure

Biomimetic Gradient Bouligand Structure Enhances Impact Resistance of Ceramic‐Polymer Composites

Anisotropic friction properties of biomimetic Cf/ZrB2-SiC ceramic composites with bouligand structures

Multiscale Toughening of ZrB2‐SiC‐Graphene@ZrB2‐SiC Dual Composite Ceramics

Method for preparing biomimetic ceramic structures with high strength and high toughness

Biomimetic structure design — a possible approach to change the brittleness of ceramics in nature

Biomimetic Structure Design, Preparation Process and Mechanical Properties of Multiphase Ceramics with High Toughness

Non-axially Aligned ZrB2-SiC/ZrB2-SiC-graphene Short Fibrous Monolithic Ceramics with Isotropic In-Plane Properties

Mechanical properties of hybrid multilayer graphene/whisker-reinforced ceramic composites: Simulation and experimental investigation

Cyclic thermal shock behaviors of carbon fibers reinforced SiCN ceramics with bio-inspired Bouligand-like architectures

The Fabrication and Mechanical Properties of Bionic Laminated ZrB2–SiC/BN Ceramic Prepared by Tape Casting and Hot Pressing

Bioinspired Tough and Strong ZrB2-SiCw/Ti–Nb–Ti Hybrid Composites with a Hierarchical Ceramic-Metal Architecture

Strong and Tough ZrB2 Materials Using a Heterogeneous Ceramic-Metal Layered Architecture

Mechanical Properties and Toughening Mechanisms of Ceramic Composites

Strong, Tough and Stiff Bioinspired Ceramics from Brittle Constituents

Improved Fracture Toughness of Laminated ZrB2-SiC-MoSi2 Ceramics Using SiC Whisker

Electrostatic Assembly Preparation of High-Toughness Zirconium Diboride-Based Ceramic Composites with Enhanced Thermal Shock Resistance Performance

High Damage-Tolerance Bio-Inspired ZL205A/SiC Composites with a Lamellar-Interpenetrated Structure

A novel method for fabricating brick-mortar structured alumina-zirconia ceramics with high toughness