Abstract:Novel bio-inspired ZL205A/SiC composites with a lamellar-interpenetrated structure were successfully fabricated via gas-pressure infiltration of a commercial ZL205A alloy into freeze-cast porous SiC scaffolds. The influences of initial ceramic content (20, 30 and 40vol%) on the microstructure and damage-tolerance behavior of the resultant composites as well as their toughening mechanism were investigated. With an increase in the ceramic content in the composite, the flexural strength and fracture toughness in the longitudinal direction gradually decreased; whereas, in the transverse direction they showed a first increase and then decrease but their elastic modulus increased. The composites displayed significant damage-tolerance anisotropy, with higher strength and toughness in the longitudinal direction (parallel to the lamellae) than that in the transverse direction (perpendicular to the lamellae). In the longitudinal bending, the ZL205A/20vol%SiC composite exhibited the maximum flexural strength (760MPa) and the largest fracture toughness (33.0MPam1/2). The excellent damage tolerance of the composites was attributed to multiple toughening mechanisms such as plastic deformation in the matrix alloy, crack blunting, deflection and branching, and uncracked-ligament bridging of the ductile alloy layers. However, in the transverse bending, the crack propagated along the ceramic layer in the composites and thus greatly weakened their damage-tolerance capability.

Fabrication method and mechanical properties of biomimetic Cf/ZrB2-SiC ceramic composites with bouligand structures

Mechanical properties of biomimetic ceramic with Bouligand architecture

Anisotropic friction properties of biomimetic Cf/ZrB2-SiC ceramic composites with bouligand structures

Fabrication and microstructure evolution of Csf/ZrB2-SiC composites via direct ink writing and reactive melt infiltration

Using flexible hydrothermal carbon-coated continuous carbon fiber to fabricate Cf/ZrB2-SiC composites by fused deposition modeling and precursor infiltration pyrolysis

Characterization and mechanical properties of Cf/ZrB2-SiC composites fabricated by a hybrid technique based on slurry impregnation, polymer infiltration and pyrolysis and low-temperature hot pressing

A Novel Vibration-Assisted Slurry Impregnation to Fabricate Cf/ZrB2-SiC Composite with Enhanced Mechanical Properties

Fabrication of (SiC-AlN)/ZrB2 Composite with Nano-Micron Hybrid Microstructure via PCS-Derived Ceramics Route

The Fabrication and Mechanical Properties of SiC/ZrB2 Laminated Ceramic Composite Prepared by Spark Plasma Sintering

Fabrication of biomorphic ZrC/C ceramics by sol–gel and carbothermal reduction processing

Fabrication of SiCw reinforced ZrB2-based ceramics

Effects of SiC Platelet and ZrSi2 Additive on Sintering and Mechanical Properties of ZrB2-based Ceramics by Hot-Pressing

Preparation of Compact ZrC-SiC Ceramic Matrix from Thermoset Precursors for C/C-ZrC-SiC Composites with High Mechanical Properties

Fabrication and properties of 2D C/C-ZrB2-ZrC-SiC composites by hybrid precursor infiltration and pyrolysis

Using Pyrolytic Carbon-Coated Short Carbon Fiber to Fabricate Csf/ZrB2-SiC Composites by Direct Ink Writing and Precursor Infiltration Pyrolysis

Preparation and Mechanical Properties of Laminated Zirconium Diboride/molybdenum Composites Sintered by Spark Plasma Sintering

Damage Mechanism Analysis to the Carbon Fiber and Fiber-Ceramic Interface Tailoring of Cf/ZrC-SiC Using PyC Coating

High Damage-Tolerance Bio-Inspired ZL205A/SiC Composites with a Lamellar-Interpenetrated Structure

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

Effect of Pyrolytic Carbon Coating on the Microstructure and Fracture Behavior of the Cf/ZrB2-SiC Composite

Biomimetic high toughness Si3N4 ceramics with inverse-bouligand structure