Abstract:Ni3Al‐based superalloys are thermally exposed to a CO2 atmosphere at 600°C/5 MPa, and the changes that occur in the alloy during the initial period of thermal exposure are investigated. The corrosion and carburization behaviors and mechanisms were investigated in detail. The results show that harmful elements do not further enter the matrix, indicating that Ni3Al‐based superalloys show good corrosion and carburization resistance during thermal exposure. (a) transmission electron micrograph of the sample after 500 h thermal exposure; (b) energy dispersive spectroscopy (EDS) mapping results in (a); (c) EDS line scan result; (d) delamination phenomenon of the oxide layer and EDS mapping results; (e) selected area electron diffraction (SAED) pattern of region | in (d); (f) SAED pattern of region || in (d). To investigate the application of Ni3Al‐based superalloys in gas turbine cycle systems, this experiment exposed Ni3Al‐based superalloys to a 600°C/5 MPa environment with 99.995% pure CO2 gas. The corrosion and carburization behaviors and mechanisms were investigated in detail. The results reveal that with prolonged thermal exposure, the surface oxides of the samples tend to develop a continuous and homogeneous transition state alumina layer. This layer serves as a protective barrier, preventing the penetration and corrosion of external carbon‐containing and oxygen‐containing substances into the matrix. A small amount of carbon‐containing hazardous substances still penetrates the oxide layer or grain boundaries through highly diffusive pathways such as nanochannels, pores, and cracks, because the transition state of alumina is not completely dense. This leads to carbon deposition at the interface between the oxide layer and the matrix, where a mixture of alumina and amorphous carbon is formed at the interface.

Corrosion of SiC-coated graphite susceptor by NH3 and Cl2

Cl 2 corrosion resistance of SiC coatings with different morphologies

Formation of Si3N4 Coating on SiC Substrate by Gas Transporting Self‐propagating High‐temperature Synthesis with the Addition of NH4Cl

Formation of Si 3 N 4 coating on SiC substrate by gas transporting self‐propagating high‐temperature synthesis with the addition of NH 4 Cl

CO2 corrosion of IG-110 nuclear graphite studied by gas chromatography

Effect of ammonium chloride on corrosion behavior of Ni-based alloys and stainless steel in supercritical water gasification process

Corrosion of SiC layers on coated zirconia particles in wet atmosphere

Corrosion behavior of SiC coated HX with MoSi2 interlayer to be utilized in iodine-sulfur cycle for hydrogen production

Investigation of Microstructure and Nanoindentation Hardness of C+ & He+ Irradiated Nanocrystal SiC Coatings during Annealing and Corrosion

Corrosion Behavior of the GH3535 and C276 Alloys at the Liquid/Gas LiCl–KCl Salt Interface at 550 °C

SiC Performance of Coated Fuel Particles under High-Temperature Atmosphere of Air

The Oxidation Behavior of Multi-layered SiC Coated Graphite in Water Vapor Containing Environment

SiC coating as hydrogen permeation reduction and oxidation resistance for nuclear fuel cladding

Effect of Hydrothermal Corrosion on the Fracture Strength of SiC Layer in Tristructural‐isotropic Fuel Particles

Investigation of the Corroded Surface of SiCw/Al Composite

The Stability of SiC Coating and SiO2/SiC Multilayer on the Surface of Graphite for HTGRs at Normal Service Condition

Corrosion Resistance of Cu-Ni-Si Alloy Under High-Temperature, High-Pressure H2S and Cl− Environments

A Study on the Corrosion Behavior of Carbon Steel Exposed to a H2S-Containing NH4Cl Medium

The corrosion behavior of CVD SiC coatings on SiCf/SiC composites in a simulated molten salt reactors environment

Effects of Corrosion in Supercritical CO2 on the Microstructural Evolution in 800H Alloy

Corrosion and carburization of Ni3Al‐based superalloys in high‐temperature carbon dioxide