Abstract:A novel theoretical model capable of quantifying the stress causing transient thermal strain (TTS) in heated concrete has been proposed in this work. It can be used in finite element models or as a direct design equation to help structural designers in assessing the stress developed during heating of concrete members caused by combined actions of mechanical loads, heating fluxes and end restraints. The model classifies heated concrete problems into three categories; concrete members heated to a certain temperature then loaded; concrete members stressed to a certain level and then heated to a certain temperature under load; concrete members heated with fully restrained ends with or without external loading. The new TTS equation has been incorporated in a novel coupled thermo-mechanical finite element model in the framework of ABAQUS. Material models capable of capturing the constitutive behaviour and specifically the degradation of material properties experienced by concrete exposed to elevated temperatures, have been selected from the literature and have been adapted to include TTS and, where absent, temperature dependence. The FE model, along with the developed stress equation, has been validated against experimental results in which samples were tested under various loading configurations and boundary conditions. It has been shown to successfully reproduce the results for all of the studied cases. Furthermore, in exploring these scenarios a number of observations were made. Firstly, it was found that the stress developed under restraint is lower than under applied preload, but that stress relaxation in part due to TTS is higher in preloaded samples. Secondly, the limit of elastic behaviour appears to be reduced in samples subject to free thermal expansion compared to those under restraint. Finally, while free thermal expansion is critical to the overall stress-strain response there is evidence that it varies with the applied stress and significantly increases at high temperatures.

Analysis of coupled transport phenomena in concrete at elevated temperatures

Hygro-thermo-mechanical analysis of spalling in concrete walls at high temperatures as a moving boundary problem

Experimental study on dynamic behavior of concrete at elevated temperatures

Global weak solutions for coupled transport processes in concrete walls at high temperatures

Concrete Thermal Cracking Analysis with Cement Hydration Model and Equivalent Age Method

Model for Hydration Heat of Cement in Concrete and Its Application

TEMPERATURE FIELD ANALYSIS IN MASSIVE CONCRETE CONSTRUCTED LAYER BY LAYER

Transient Nonlinear Heat Conduction in Concrete Structures: A Semi-Analytical Approach

Aspects of Permeability in Modelling of Concrete Exposed to High Temperatures

Microstructural modeling of moisture-thermal and mechanical behavior within concrete during drying at elevated temperatures

Intrinsic Permeability Evolution in High Temperature Concrete: An Experimental and Numerical Analysis

FINITE ELEMENT ANALYSIS OF HYDRATION HEAT TEMPERATURE FIELD IN CONCRETE FOUNDATION OF TONGBAI POWER STATION

Numerical simulation of the freezing process of concrete

A Coupled Hygro-Thermal Model of Early-Age Concrete Based on Micro-Pore Structure Evolution

Computational homogenization of non-stationary transport processes in masonry structures

Coupling Effect of Temperature and Relative Humidity Diffusion in Concrete under Ambient Conditions

Analysis of coupled heat and moisture transfer in masonry structures

A Generalised Model for Direct Prediction of Stresses in Concrete at High Temperatures

Heat and Mass Transfers in a Heated Concrete Element: 20 to 600°C

Stress–strain constitutive equations of concrete material at elevated temperatures

Thermal Analysis of Mass Concrete Embedded with Double-Layer Staggered Heterogeneous Cooling Water Pipes