Abstract:The heterogeneous nucleation process of polypropylene (PP)/high density polyethylene (HDPE)/thermoplastic elastomer (POE) composites was realized through blending modification, and characterization techniques, including scanning electron microscopy, differential scanning calorimetry, X-ray diffraction, and dynamic mechanical analysis, were used to analyze the pattern of the impact of modified dicyclohexyl-terephthalamide (TMB-5) on the mechanical properties and thermal stability of the PP/HDPE/POE composites. The results indicated that the modified TMB-5 was advantageous to the improvement of the mechanical properties and thermal stability of the high-temperature (cooking temperature)-resistant PP/HDPE/POE composites. When the amount of added modified TMB-5 was 0.4%, the impact strength and tensile strength of the PP/HDPE/POE composites increased to 36.3 kJ/m 2 and 31.7 MPa, respectively, which were, respectively, 99.5% and 8.5% higher than those of the materials prepared when the amount of added modified TMB was 0.1%. The materials had higher storage modulus in room-temperature and high-temperature environments: 2,438.2 MPa (room temperature), 1,103.9 MPa (120°C), and 1,054.8 MPa (140°C). In addition, the capability of the PP/HDPE/POE composites to crystallize was improved continuously, and the crystallinity increased considerably. At the same time, the crystallization and melting temperatures increased, β-crystal formation was induced, and glass transition temperature increased, thus effectively improving the mechanical properties and thermal stability of the high-temperature (cooking temperature)-resistant PP/HDPE/POE composites.

Structural Optimization of PA12/MVQ@POE‐g‐MAH Ternary Composite for Superior Toughness and Low Temperature Resistance

Preparation of Poly(Phenylene Oxide)/Polyamide-6 Nanocomposites with High Tensile Strength and Excellent Impact Performance

Preparation and performance study of POE-g-MAH/GMA toughened bio-based PA56 alloys

Preparation of PBT/POE‐g‐GMA/PP Ternary Blends with Good Rigidity–toughness Balance by Core–shell Particles

Study on high-strength and high-toughness PA6/POE-g-MAH/MWNTs ternary composites

Relationship between structure and properties in high-performance PA6/SEBS-g-MA/(PPO/PS) blends: The role of PPO and PS

Highly toughened PA6 using residue of plasticized PVB film via two-step reactive melt blending

Preparation and Property Study of PA56/POE-g-MAH-GMA/PPO Ternary Alloy

Toughening Behavior and Morphology Study of PA6/thermal Liquid Crystalline Polyamide Blends

Toughness enhancement of polyamide 6,12 with intermolecular hydrogen bonding with 3‐pentadecylphenol

Ppr/Epdm/Poe-G-Ma/Ommt Nanocomposites with Superior Low-Temperature Toughness Based on Embedded Ommt Within Compound Rubber Dispersion Phase

STUDY ON TOUGHENING OF PA6/POE-g-MAH/NANO BaSO_4 BLENDS

Preparation and Properties of Toughened/flame‐retardant PA6/glass‐fiber Composites Reinforced by Linear Polyphosphazene Elastomers

Concurrent enhancement of dimensional stability and thermal conductivity of thermoplastic polyamide 12T/Boron nitride composites by constructing oriented structure

Preparation and properties of nylon 11/ethylene‐vinyl alcohol/montmorillonite ternary composites

Mechanism and properties of Super-Toughened ternary blends with unique 'Tassel-Bundle' morphology

Mechanical properties and thermal stability of high-temperature (cooking temperature)-resistant PP/HDPE/POE composites

Mechanical and gas barrier properties of polyamides 6/ organically modified montmorillonite/ maleic anhydride grafted polyolefin elastomer composites produced by rotational molding

Investigation of toughening mechanism about core-shell morphology in bio-based polyamide ternary composites

Simultaneous Enhancement of the Conductivity and Toughness for Polyamide 66 Nanocomposites by Regulating the Hydrogen Bond and Introducing Microcellular Structures

Study on the Structure and Properties of PA6/POE-g-MAH Blends