Abstract:The separator is a significant safety component inside the lithium-based battery. To design a higher-power-density system, a functional separator has attracted more attention. In our study, vinyl trimethoxysilane (VTMS) has been directly grafted onto a polyethylene (PE) separator by γ-irradiation. We have evaluated the performance of a PE separator grafted with VTMS (PE-g-SiH) and its basic hydrolysis separator (PE-g-SiO) in detail and have discussed the role of separator surface polarity in the ion transport process. The consequence shows that the lithium-ion transference number of the PE-g-SiO separator is 0.38, superior than 0.27 of a pure PE separator and 0.29 of a PE-g-SiH separator. It can be a reason that the LiCoO2/Li cell with a PE-g-SiO separator shows excellent cycle stability and rate performance. Furthermore, in the case of a PE-g-SiO separator, the Li/Li symmetric model possesses the lowest activation energy of 55.2 kJ mol–1, indicating that lithium ions migrate easily at the interface of electrodes and a separator filled with liquid electrolyte. It is attributed to the improved interaction between the separator wall and solvent, which is in favor of lithium-ion-selective transport. Hence, separator functionalization is expected to enhance the battery performance further.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00737?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00737</a>.Figure S1: Contact angle of a bare PE separator, PE-g-SiH separator, and PE-g-SiO separator with a liquid electrolyte. Figure S2: I–V curves of the SS/Li model based on a PE separator, PE-g-SiH separator, and PE-g-SiO separator. Figure S3: Voltage–time curves of the Li/Li model based on a PE separator, PE-g-SiH separator, and PE-g-SiO separator at the deposition capacity of 1.5 mAh cm–2 and the current density of 1.5 mA cm–2. Figure S4: Nyquist plots of LiCoO2/Li half-cells based on a PE separator, PE-g-SiH separator, and PE-g-SiO separator after (a) rate performance and (b) cycle performance. Table S1: Characteristics of these separators (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00737/suppl_file/ae1c00737_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Improving Ionic Conductivity and Lithium-Ion Transference Number in Lithium-Ion Battery Separators.

Tailoring the Function of Battery Separators Via the Design of MOF Coatings

Progress in polymeric separators for lithium ion batteries

Modification of Polyolefin Separators for Lithium Ion Secondary Batteries

Important Role of Ion Flux Regulated by Separators in Lithium Metal Batteries

Advanced separators for lithium-ion batteries

The Mechanism of Inhomogeneous Mass Transfer Process of Separators in Lithium-Ion Batteries

Enhancement of ionic transport characteristics and cell performance through multi-layered separator microstructure in Li-ion cells

Effect of Polyphenol-Polyamine Treated Polyethylene Separator on the Ionic Conduction and Interface Properties for Lithium-Metal Anode Batteries

Role of Separator Surface Polarity in Boosting the Lithium-Ion Transport Property for a Lithium-Based Battery

Ionic conductivity enhanced by crown ether bridges for lithium-ion battery separators

Novel Composite Separators Based on Heterometallic Metal‐Organic Frameworks Improve the Performance of Lithium‐Ion Batteries

Ion Transport Regulated Lithium Metal Batteries Achieved by Electrospun ZIF/PAN Composite Separator with Suitable Electrolyte Wettability

Topological and Network Analysis of Lithium Ion Battery Components: The Importance of Pore Space Connectivity for Cell Operation

Structure Optimization for Cellulose‐Based Separator through Fiber Size Regulation for High Performance Lithium Metal Batteries

Quantifying the Effect of Separator Thickness on Rate Performance in Lithium-Ion Batteries

Lithium ion battery separators: Development and performance characterization of a composite membrane

Fenoterol and asthma mortality in New Zealand.

Tannic Acid/polyethyleneimine-Decorated Polypropylene Separators for Li-Ion Batteries and the Role of the Interfaces Between Separator and Electrolyte

Surface Design for High Ion Flux Separator in Lithium-Sulfur Batteries