Abstract:The separator is a significant safety component inside the lithium-based battery. To design a higher-power-density system, a functional separator has attracted more attention. In our study, vinyl trimethoxysilane (VTMS) has been directly grafted onto a polyethylene (PE) separator by γ-irradiation. We have evaluated the performance of a PE separator grafted with VTMS (PE-g-SiH) and its basic hydrolysis separator (PE-g-SiO) in detail and have discussed the role of separator surface polarity in the ion transport process. The consequence shows that the lithium-ion transference number of the PE-g-SiO separator is 0.38, superior than 0.27 of a pure PE separator and 0.29 of a PE-g-SiH separator. It can be a reason that the LiCoO2/Li cell with a PE-g-SiO separator shows excellent cycle stability and rate performance. Furthermore, in the case of a PE-g-SiO separator, the Li/Li symmetric model possesses the lowest activation energy of 55.2 kJ mol–1, indicating that lithium ions migrate easily at the interface of electrodes and a separator filled with liquid electrolyte. It is attributed to the improved interaction between the separator wall and solvent, which is in favor of lithium-ion-selective transport. Hence, separator functionalization is expected to enhance the battery performance further.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00737?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00737</a>.Figure S1: Contact angle of a bare PE separator, PE-g-SiH separator, and PE-g-SiO separator with a liquid electrolyte. Figure S2: I–V curves of the SS/Li model based on a PE separator, PE-g-SiH separator, and PE-g-SiO separator. Figure S3: Voltage–time curves of the Li/Li model based on a PE separator, PE-g-SiH separator, and PE-g-SiO separator at the deposition capacity of 1.5 mAh cm–2 and the current density of 1.5 mA cm–2. Figure S4: Nyquist plots of LiCoO2/Li half-cells based on a PE separator, PE-g-SiH separator, and PE-g-SiO separator after (a) rate performance and (b) cycle performance. Table S1: Characteristics of these separators (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00737/suppl_file/ae1c00737_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Enhancement of ionic transport characteristics and cell performance through multi-layered separator microstructure in Li-ion cells

Copolymer-assisted Polypropylene Separator for Fast and Uniform Lithium Ion Transport in Lithium-ion Batteries

Improving Ionic Conductivity and Lithium-Ion Transference Number in Lithium-Ion Battery Separators.

Quantifying the Effect of Separator Thickness on Rate Performance in Lithium-Ion Batteries

Facile Fabrication of Regenerated Cellulose-Based Separators for High-Performance Lithium-Ion Batteries by Regulating Degrees of Polymerization

Dependence of lithium metal battery performances on inherent separator porous structure regulation

Separator structural-chemical features dependency on lithium-ion battery performances

Ionic conductivity enhanced by crown ether bridges for lithium-ion battery separators

High-stability core-shell structured PAN/PVDF nanofiber separator with excellent lithium-ion transport property for lithium-based battery

Multi-channeled halloysite nanotube-blended polybenzimidazole separators for enhancing lithium-ion battery performance

Effective Strategy to Improve Safety of Lithium-Ion Batteries by Constructing Ion Transport Modes and Employing a Cross-Linking Structure in the Separator

Role of Separator Surface Polarity in Boosting the Lithium-Ion Transport Property for a Lithium-Based Battery

Tissue paper‐based composite separator using double-crosslinked polymer electrolyte as coating layer for lithium-ion battery with superior ion transport and cyclic stability

Zwitterionic cellulosic membrane as a new separator with enhanced ionic conductivity and performance for lithium-ion batteries

On the Implication of Porosity Configuration on Lithium-Ion Cell Performance: A Numerical Study

Advanced separators for lithium-ion batteries

Important Role of Ion Flux Regulated by Separators in Lithium Metal Batteries

Structure Optimization for Cellulose‐Based Separator through Fiber Size Regulation for High Performance Lithium Metal Batteries

Novel Bifunctional Separator with a Self-Assembled FeOOH/Coated g-C 3 N 4 /KB Bilayer in Lithium–Sulfur Batteries

The Mechanism of Inhomogeneous Mass Transfer Process of Separators in Lithium-Ion Batteries