Abstract:The practical application of Lithium-sulfur (Li-S) batteries is significantly inhibited by (i) the notable 'shuttle effect' of lithium polysulfides (LiPS), (ii) the corrosion of the lithium interface, and (iii) the sluggish redox reaction kinetics. The functional separator in the Li-S battery has the potential to provide the perfect solution to these problems. Herein a triple-layer multifunctional PVDF-based nanofiber separator, which contains GoTiN/PVDF layer on the top and bottom and ZnTPP/PVDF layer on the middle, is designed. The polarity and porous structure of this multifunctional separator can greatly improve the wettability of electrolytes and enhance the transportation of Li+. With the zinc-based porphyrin framework (ZnTPP) structure, this separator has a strong chemisorption and LiPS conversion ability, which greatly prevent the 'shuttle effect'. Consequently, the designed multilayer separator showed excellent electrochemical performance. As a result, the cell with GoTiN@ZnTPP@GoTiN nanofiber membrane displayed an initial discharge capacity of 1180 mAh/g with a benign capacity retention of 65.9% at 0.5C and high coulombic efficiency of more than 98.5% after 100 cycles. Even at 2C, it can still release a capacity of 798 mAh/g. Moreover, the remarkable capacity of 591 mAh/g could be achieved with a high sulfur load of 5.76 mg/cm2 under a current density of 0.1C. Based on these merits, this novel and scalable multifunctional separator is a promising candidate to replace the conventional PP separator for advanced Li-S batteries to deal with various challenges.

Surface Design for High Ion Flux Separator in Lithium-Sulfur Batteries

Suppression Of Polysulfide Shuttling With A Separator Modified Using Spontaneously Polarized Bismuth Ferrite For High Performance Lithium-Sulfur Batteries

Construction of Soft Base Tongs on Separator to Grasp Polysulfides from Shuttling in Lithium-Sulfur Batteries.

Separator Modification and Functionalization for Inhibiting the Shuttle Effect in Lithium-Sulfur Batteries

Fabrication of electrospun bilayer separators for lithium-sulfur batteries: A surface and structure dual modification strategy

Separator engineering toward suppressed shuttle effect and homogenized lithium deposition in lithium−sulfur batteries

A Multifunctional Separator for High-Performance Lithium-Sulfur Batteries

A gel polymer electrolyte functionalized separator for high-performance lithium-sulfur batteries

Introduced Hierarchically Ordered Porous Architecture on a Separator as an Efficient Polysulfide Trap toward High-Mass-Loading Li-S Batteries

Efficient capture and conversion of polysulfides by zinc protoporphyrin framework-embedded triple-layer nanofiber separator for advanced Li-S batteries

Bifunctional Separator with Ultra-Lightweight MnO2 Coating for Highly Stable Lithium–Sulfur Batteries

Plasma and Magnetron Sputtering Constructed Dual-Functional Polysulfides Barrier Separator for High-Performance Lithium-Sulfur Batteries

A Novel CuS/graphene-coated Separator for Suppressing the Shuttle Effect of Lithium/sulfur Batteries

Breaking the Barrier: Strategies for Mitigating Shuttle Effect in Lithium–Sulfur Batteries Using Advanced Separators

Rational Design of a Gel-Polymer-Inorganic Separator with Uniform Lithium-Ion Deposition for Highly Stable Lithium-Sulfur Batteries.

Alleviating the shuttle effect via bifunctional MnFe2O4/AB modified separator for high performance lithium sulfur battery

Designing of multifunctional and flame retardant separator towards safer high-performance lithium-sulfur batteries

A Scalable Hybrid Separator for A High Performance Lithium-Sulfur Battery

Modification and Functionalization of Separators for High Performance Lithium–Sulfur Batteries

Lignin Nanoparticle-Coated Celgard Separator for High-Performance Lithium-Sulfur Batteries

Construction of Multifunctional and Flame Retardant Separator Towards Stable Lithium-Sulfur Batteries with High Safety