Abstract:The separator is a significant safety component inside the lithium-based battery. To design a higher-power-density system, a functional separator has attracted more attention. In our study, vinyl trimethoxysilane (VTMS) has been directly grafted onto a polyethylene (PE) separator by γ-irradiation. We have evaluated the performance of a PE separator grafted with VTMS (PE-g-SiH) and its basic hydrolysis separator (PE-g-SiO) in detail and have discussed the role of separator surface polarity in the ion transport process. The consequence shows that the lithium-ion transference number of the PE-g-SiO separator is 0.38, superior than 0.27 of a pure PE separator and 0.29 of a PE-g-SiH separator. It can be a reason that the LiCoO2/Li cell with a PE-g-SiO separator shows excellent cycle stability and rate performance. Furthermore, in the case of a PE-g-SiO separator, the Li/Li symmetric model possesses the lowest activation energy of 55.2 kJ mol–1, indicating that lithium ions migrate easily at the interface of electrodes and a separator filled with liquid electrolyte. It is attributed to the improved interaction between the separator wall and solvent, which is in favor of lithium-ion-selective transport. Hence, separator functionalization is expected to enhance the battery performance further.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00737?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00737</a>.Figure S1: Contact angle of a bare PE separator, PE-g-SiH separator, and PE-g-SiO separator with a liquid electrolyte. Figure S2: I–V curves of the SS/Li model based on a PE separator, PE-g-SiH separator, and PE-g-SiO separator. Figure S3: Voltage–time curves of the Li/Li model based on a PE separator, PE-g-SiH separator, and PE-g-SiO separator at the deposition capacity of 1.5 mAh cm–2 and the current density of 1.5 mA cm–2. Figure S4: Nyquist plots of LiCoO2/Li half-cells based on a PE separator, PE-g-SiH separator, and PE-g-SiO separator after (a) rate performance and (b) cycle performance. Table S1: Characteristics of these separators (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00737/suppl_file/ae1c00737_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Effect of Polyphenol-Polyamine Treated Polyethylene Separator on the Ionic Conduction and Interface Properties for Lithium-Metal Anode Batteries

Copolymer-assisted Polypropylene Separator for Fast and Uniform Lithium Ion Transport in Lithium-ion Batteries

PVDF/lithiated Sulfonated Poly (ether Ether Ketone) Blend Coated PE Separators for High-Performance Lithium Metal Batteries

Regulating Li ions transportation and deposition with Polydopamine/Polyethyleneimine Functional Separator for Superior Li Metal Battery

High-performance polyethylene separators for lithium-ion batteries modified by phenolic resin

Tannic Acid/polyethyleneimine-Decorated Polypropylene Separators for Li-Ion Batteries and the Role of the Interfaces Between Separator and Electrolyte

Polyhedral Oligomeric Silsesquioxane Modified Polyolefin Separator for Advanced Lithium–Metal Batteries

Thickness Regulation of Electric Double Layer Via Electronegative Separator to Realize High-Performance Lithium-Metal Batteries

A tailored ceramic composite separator with electron-rich groups for high-performance lithium metal anode

Synergistic effect of dispersant and wetting reagent on wettability, thermal Stability and electrochemical properties of PVDF-coating polyethylene separator for lithium-ion batteries

Excellent Rate Capability and Cycle Life of Li Metal Batteries with ZrO2/POSS Multilayer-Assembled PE Separators

Atomic Interlamellar Ion Path in Polymeric Separator Enables Long-Life and Dendrite-Free Anode in Lithium Ion Batteries

Polydopamine-assisted in Situ Formation of Dense Aramid Nanofibers Layer on Polyethylene Separator for Lithium-Ion Battery

Engineering the Li-ion flux and interfacial chemistry toward stable Li metal anode via a simple separator coating

Ultrathin Composite Separator Based on Lithiated COF Nanosheet for High Stability Lithium Metal Batteries

Polyphenols Assisted Silica Coating on Polypropylene Separators with Improved Wettability and Heat‐resistance for Lithium‐ion Batteries

Aramid Nanofibers/Polydopamine Coating Polyethylene Separator for Lithium-Ion Battery

Enhanced Wettability and Thermal Stability of Polypropylene Separators by Organic–inorganic Coating Layer for Lithium‐ion Batteries

Amino‐functionalized SiO2 Modified Porous Polyetherimide Separator for High Performance Li‐S Batteries

Polyethylene separator grafting with polar monomer for enhancing the lithium-ion transport property

Role of Separator Surface Polarity in Boosting the Lithium-Ion Transport Property for a Lithium-Based Battery