Abstract:Abstract Adhesion of bacteria and platelets on blood-contact implants and surgical devices is one of the causes of infections and thrombus. A superhydrophobic surface serving as a protective layer can minimize adhesion and contamination due to the low surface energy. The objective of this paper is to construct a superhydrophobic surface on a titanium implant by a combination of a topological structure and chemical coating. First, a micro/nano hierarchical morphology is obtained by sandblasting, acid-etching, and anodic oxidation. Then, a low surface energy coating material (fluoroalkylsilane, as the example case in this study) is used to modify the surface further. The effects of the morphology of micro and/or nanoscales and corresponding fluorination on the wettability are investigated. The results show that a hierarchical surface with microroughness and nanotubes is successfully constructed, and the contact angle (CA) is 44.9°, indicating good hydrophilicity. Interestingly, after being modified by fluoroalkylsilane, the surface converted from hydrophilic to superhydrophobic with a CA of 151.4°. In contrast, the fluorination modification of single micro or nanofeatures cannot achieve superhydrophobicity, indicating that the micro/nanostructures may show a synergistic effect for an efficient fluorination coating later on. Overall, our results demonstrate the feasibility of achieving a superhydrophobic surface via the micro/nano topological patterning and fluorination modification. The proposed method is expected to enrich the preparation technologies of superhydrophobic titanium surfaces. Graphic abstract

Superhydrophilic surface on Ti6Al4V with good HA-inducing ability prepared via an eco-friendly two-step method

Fabrication of Modifier-Free Superhydrophobic Surfaces with Anti-Icing and Self-Cleaning Properties on Ti Substrate by Anodization Method

A super-hydrophilic surface enhanced by the hierarchical reticular porous structure on a low-modulus Ti-24Nb-4Zr-8Sn alloy

Preparation of Superhydrophobic Surface on Titanium Alloy via Micro-Milling, Anodic Oxidation and Fluorination

Construction of Robust Hierarchical Micro-nanostructure by Laser Irradiation and Hydrothermal Treatment on Titanium Alloy for Superhydrophobic and Slippery Surfaces

Construction of a Multiple-Scale Implant Surface with Super-Hydrophilicity

Preparation and Properties of Superhydrophobic Titanium Alloy with Hierarchical Structure

Fabrication of Air-Permeable Superhydrophobic Surfaces with Excellent Non-Wetting Property

Hydrothermal treatment of Ti surface to enhance the formation of low crystalline hydroxyl carbonate apatite

Preparation of superhydrophobic titanium surface via the combined modification of hierarchical micro/nanopatterning and fluorination

A Superhydrophobic Coating On Titanium Alloys By Simple Chemical Etching

A facile fabrication method of wettability modification of TiAl6V4 based on alkali solution treatment: Superhydrophilic, superhydrophobic and slippery surface

Microstructural and surface modifications and hydroxyapatite coating of Ti-6Al-4V triply periodic minimal surface lattices fabricated by selective laser melting

Surface modification of TiTa alloy by hydrothermal-precalcification treatment and its excellent apatite-forming inductivity

Bioactive Performances of Surface Modification of Ti–6Al–4V Jointly Using Ultrasonic‐Assisted Microarc Oxidation and Hydrothermal Treatment

Hydrophilicity of Bioactive Titanium Surface with Different Structure, Composition, Crystal Form and Grain Size

Surface and interface analysis of HAP/TiO2 composite films on Ti6A14V

Surface and interface analysis of HAP/TiO2 composite films on Ti6Al4V

Hydroxyapatite coating on Ti6Al4V alloy using a sol–gel derived precursor

Micro/Nanoscale Surface Modification of Ti6Al4V Alloy for Implant Applications

The Fabrication of Unwettable Superhydrophobic Surfaces by Reactive Wetting of AgCuTi into an AAO Template