Abstract:Titanium (Ti) and its alloys have been extensively used for biomedical applications and surface wettability makes large differences during their applications. Especially, superhydrophobic surfaces with water contact angle (WCA) > 150 degrees are under great interest and are now finding increased use in the biomedical arena. Up to now, most fabrication of superhydrophobic surface on Ti substrates would introduce external organics with low surface free energy (SFE), which could influence the intrinsic chemical components of Ti surface and face the risk of degradation when exposed for a long time. But it seems quite difficult to achieve superhydrophobic surfaces on Ti substrates without organic coating and few researches have been reported. Herein, a superhydrophobic Ti surface (WCA = 151.9 degrees) was successfully fabricated by a novel method including anodization, H2O2 and aging treatment. During this procedure, no external organics with low SFE were introduced. Then surface topography and roughness, 3D morphology, wettability, crystalline structure and chemical components of the as-prepared samples were characterized. The as-prepared surface was coated with a TiO2 layer, and exhibited a porous morphology with numbers of crater structures with roughness value (Ra) about 1.21 mu m. It was found the absorption of hydrocarbon and decrease of hydroxyl (OH) groups together changed the intrinsic wettability of Ti surface, where the removal of OH groups by H2O2 and aging treatment played a critical role. The results indicated that surface micro-roughness and declined intrinsic wettability were responsible for the formation of superhydrophobicity. This novel method could achieve superhydrophobicity without changing the intrinsic properties of Ti/TiO2 surface and would have great potential in biomedical applications.

Construction of Robust Hierarchical Micro-nanostructure by Laser Irradiation and Hydrothermal Treatment on Titanium Alloy for Superhydrophobic and Slippery Surfaces

Fabrication of Modifier-Free Superhydrophobic Surfaces with Anti-Icing and Self-Cleaning Properties on Ti Substrate by Anodization Method

A Biomimetic Hierarchical Structure on Selective Laser Melting Titanium with Enhanced Hydrophilic/hydrophobic Surface

Superhydrophobic Surface Preparation and Wettability Transition of Titanium Alloy with Micro/Nano Hierarchical Texture

Achieving of Bionic Super-Hydrophobicity by Electrodepositing Nano-Ni-pyramids on the Picosecond Laser-Ablated Micro-Cu-cone Surface

Fabrication of Air-Permeable Superhydrophobic Surfaces with Excellent Non-Wetting Property

Preparation of Superhydrophobic Surface on Titanium Alloy via Micro-Milling, Anodic Oxidation and Fluorination

Time Dependency of Superhydrophilic and Superhydrophobic Surfaces Produced by Nanosecond Laser Irradiation Assisted by Post-Annealing and Silanization

Fabrication of Superhydrophobic Ti–6Al–4V Surfaces with Single-Scale Micotextures by using Two-Step Laser Irradiation and Silanization

A simple fabrication method for mechanically robust superhydrophobic surface by hierarchical aluminum hydroxide structures

Fabrication of Titanium-Based Microstructured Surfaces and Study on Their Superhydrophobic Stability

Preparation and Properties of Superhydrophobic Titanium Alloy with Hierarchical Structure

Preparation of superhydrophobic titanium surface via the combined modification of hierarchical micro/nanopatterning and fluorination

Nanostructured Superhydrophobic Titanium-Based Materials: A Novel Preparation Pathway to Attain Superhydrophobicity on TC4 Alloy

A facile fabrication method of wettability modification of TiAl6V4 based on alkali solution treatment: Superhydrophilic, superhydrophobic and slippery surface

A Novel Method to Fabricate Organic-Free Superhydrophobic Surface on Titanium Substrates by Removal of Surface Hydroxyl Groups

Wettability, droplet impact and anti-icing performance of micro-nano hierarchical structure on Ti6Al4V surface via integrating of chemical modification and laser-induced plasma micromachining

Facile fabrication of hierarchical textures for substrate-independent and durable superhydrophobic surfaces

In-situ Fabricated Hierarchical Nanostructure on Titanium Alloy As Highly Stable and Durable Super-Lubricated Surface for Anti-Biofouling in Marine Engineering

Fabrication of biomimetic superhydrophobic and anti-icing Ti6Al4V alloy surfaces by direct laser interference lithography and hydrothermal treatment

One-Step Fabrication of Robust Superhydrophobic Steel Surfaces with Mechanical Durability, Thermal Stability, and Anti-icing Function.