Abstract:Quartz lamp heaters and hypersonic wind tunnel are currently applied in thermal assessment of heat resistant materials and surface of aircraft. However, it is difficult to achieve precise heat flux distribution by quartz lamp heaters, while enormous energy is required by a large scale hypersonic wind tunnel. Electron beam can be focused into a beam spot of millimeter scale by an electromagnetic lens and electron-magnetically deflected to achieve a rapid scanning over a workpiece. Moreover, it is of high energy utilization efficiency when applying an electron beam to heat a metal workpiece. Therefore, we propose to apply an electron beam with a variable speed to establish a novel method to realize various non-uniform heat flux boundary conditions. Besides, an electron beam thermal assessment equipment is devised. To analyze the feasibility of this method, an approach to calculate the heat flux distribution formed by an electron beam with variable-speed scanning is constructed with beam power, diameter of the beam spot and dwell duration of the electron beam at various locations as the key parameters. To realize a desired non-uniform heat flux distribution of the maximum gradient of 1.1 MW/m3, a variable-speed scanning strategy is constructed on basis of the conservation of energy. Compared with the desired heat flux, the maximum deviation of the scanned heat flux is 4.5% and the deviation in the main thermal assessment area is less than 3%. To verify the method, taking the time-average scanned heat flux as the boundary condition, a heat transfer model is constructed and temperature results are calculated. The experiment of variable-speed scanning of an electron beam according to the scanning strategy has been carried out. The measured temperatures are in good agreement with the predicted results at various locations. Temperature fluctuation during the scanning process is analyzed, and it is found to be proportional to the scanned heat flux divided by volumetric heat capacity, which is applicable for different materials up to 3.35 MW/m2. This study provides a novel and effective method for precise realization of various non-uniform heat flux boundary conditions.

Evaluation of surface temperature uniformity of multi-zone ceramic heaters with embedded cooling channels for electrostatic chuck

Numerical evaluation on surface temperature uniformity of multi-zone and single-zone ceramic heaters with the electrostatic chuck

Design of Temperature Testing System in Multi-Parameter Combined Environmental Test

Enhanced temperature uniformity of electrostatic chuck: ceramic surface contact ratio and backside gas pressure

Implementation Of Temperature Dependent Contact Resistance Model For The Analysis Of Deep Submicron Devices Under Esd

On-Wafer Temperature Monitoring Sensor for Condition Monitoring of Repaired Electrostatic Chuck

Process kit and wafer temperature effects on dielectric etch rate and uniformity of electrostatic chuck

Experimental study on nanofludic heat pipe hot chuck plate in semiconductor wafer baking process

Finite Element Analysis on Factors Influencing the Clamping Force in an Electrostatic Chuck

Experimental and Numerical Simulation Study on Uniformity of Temperature and Flow Field in an Advanced Packaging Electroplating Cell

Heat Transfer Simulation and Analysis of Electron Collector Based on Real-time Uniformity Detection Device of Irradiation Accelerator

Thermal design for enhanced temperature uniformity on spark plasma sintering device

Theoretical analysis of induction heating in high-temperature epitaxial growth system

Hybrid Surfaces with Capillary Wick and Minichannels for Enhancement of Phase-Change Immersion Cooling of Power Electronics

A novel method to realize a non-uniform heat flux distribution through the variable-speed scanning of an electron beam

Simulation of Flow and Thermal Field in a PECVD Reaction Chamber

Numerical study on temperature and thermal stress behaviors in silicon carbide heating elements within high-temperature annealing furnaces

Study on the uneven flow distribution and non-uniform heat transfer in microchannels

Multi-Zone Integrated Iterative-Decoupling Control of Temperature Field of Large-Scale Vertical Quenching Furnaces Based on ESRNN

Electrostatic Field Simulation of Variable Pitch Helical Cathode

Numerical Investigation on Thermal Performance of Two-Phase Immersion Cooling Method for High-Power Electronics