Abstract:Large-scale and high precision absolute distance measurement is essential in aerospace technology and advanced manufacturing. Traditional method of measuring distance cannot meet this requirement. Since the advent of optical frequency comb, it has brought a revolutionary breakthrough to absolute distance measurement. In the past decade, there were proposed many methods to measure long absolute distances with high accuracy. Especially, the simple method of using adjacent pulse-to-pulse distance as a ruler for distance measurement has been widely used. The accuracy of this method depends mainly on the knowledge of relative positions of the two overlapped pulses, i.e., pulse-to-pulse alignment. In our previous study, we have proposed a heterodyne interferometer based on synthetic wavelength method with femtosecond laser. The synthetic wavelength is derived from the virtual second harmonic and the real second harmonic, and the real second harmonic is produced by a piece of periodically poled LiNbO3 (PPLN) crystal. However, the second harmonic generation system makes the system complicated, and causes a great optical energy loss. In order to solve this problem, we generate the synthetic wavelength by two spatial band-pass filters in our present study, which can simplify the system greatly. Moreover, we can reduce the optical energy loss and tune the synthetic wavelength by controlling the angle of the filter. The synthetic wavelength used in the present system is 71.39 μm. The interferometricphase of the synthetic wavelength is used as a mark for the pulse-to-pulse alignment. In order to reduce the influences of air disturbance and temperature variation, we set up a thermal-insulated cover for the interferometer to stabilize the environment in the system. By using this cover, the optical path length difference of the system in 450 s can be reduced from 8.56 μm to 0.21 μm. To demonstrate the e?cacy of the method described above, the target mirror is moved by eight steps in steps of 5 mm. We compare the measurement results with those obtained by a commercial interferometer, and the residual error is less than 100 nm. Since the measurement range is larger than our previous study, the relative accuracy is better than the previous system. In conclusion, we demonstrate a synthetic-wavelength based absolute distance measurement by using heterodyne interferometry of a femtosecond laser. Two spatial band-pass filters are used to generate the synthetic wavelength, which can simplify the system. The comparison results show that the system has an accuracy better than 100 nm in a displacement of 40 mm. The accuracy of the experimental system can be further improved by making the common-path of the two interferometers longer, locking the fceo to the atomic clock and sampling the data synchronously.

Suppression of frequency-mixing effect for pm-level heterodyne interferometers based on "zero coupling" optical path length control

Suppression of low-frequency intensity noise using PLZT based high speed VOA

High synchronization absolute distance measurement using a heterodyne and superheterodyne combined interferometer

Suppression of Nonlinear Optical Frequency Sweeping in Frequency-Scanning Interferometry for Absolute Distance Measurement

Suppression of Phase Noise Induced by Optical Interference in Optoelectronic Oscillators

Effect of Dual-Channel Optical Feedback on Self-Mixing Interferometry System

A Spurious Frequencies Suppression Method for Optical Frequency Comb Based Microwave Photonic Filter

Method for Suppressing Periodic Nonlinear Errors Caused by High-Order Optical Crosstalk in High-Subdivision Homodyne Interferometer

Improving the accuracy of a dual-comb interferometer by suppressing the relative linewidth

Time delay interferometry with a transfer oscillator.

Investigation and Mitigation of Noise Contributions in a Compact Heterodyne Interferometer

Highly Thermal-Stable Heterodyne Interferometer with Minimized Periodic Nonlinearity

Six-orders-of-magnitude-spanning dispersion measurement via Kalman filtering-aided white-light interferometry

Efficient Common-Mode Noise Suppression for Fiber-Optic Interferometric Sensor Using Heterodyne Demodulation

Length Metrology with Ultra-High Precision Using Fiber-Based Optical Frequency Combs

Experimental demonstration of picometer level signal extraction with time-delay interferometry technique

A Wavelength-Stabilized and Quasi-Common-Path Heterodyne Grating Interferometer With Sub-Nanometer Precision

Absolute Distance Measurement by Two-Color Heterodyne Pulse-to-pulse Interferometry of Optical Frequency Combs

Precise Displacement Measurement in Single-Beam Interferometry Employing Photonic Metamaterial with Effective Zero-Index.

Synthetic-wavelength Based Absolute Distance Measurement Using Hetero Dyne Interferometry of a Femtosecond Laser

Effect of Dispersion on Indistinguishability Between Single-Photon Wave-Packets