Abstract:In this work, we have built an experimental setup to simulate the clock noise transmission with two spacecrafts and two optical links, and further demonstrated the extraction of picometer level signal drowned by the large laser frequency noise and clock noise with the data post-processing method. Laser frequency noise is almost eliminated by using the idea of time-delay interferometry (TDI) to construct an equal arm interferometer. Clock asynchronism and clock jitter noise are significantly suppressed by laser sideband transmitting the clock noise using an electro-optic modulator (EOM). Experimental results show a reduction in laser frequency noise by approximately 10^5 and clock noise by 10^2, recovering a weak displacement signal with an average amplitude about 60 picometer and period 1 second. This work has achieved the principle verification of the noise reduction function of TDI technique to some extent, serving the data processing research of space-borne gravitational wave detection.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is: **How to extract weak displacement signals at the picometer (pm) level in the presence of a large amount of laser frequency noise and clock noise**. Specifically, the authors constructed an experimental device to simulate laser interferometry between two spacecrafts, and recovered weak displacement signals at the picometer level from signals submerged in large noise through post - processing techniques (Time - Delay Interferometer technique, TDI). ### Specific background of the problem 1. **Requirements for gravitational wave detection**: - Ground - based gravitational wave detectors (such as LIGO) are mainly sensitive to gravitational waves in the frequency band from 10 Hz to 10^4 Hz, but are limited by ground vibration noise and gravity gradient noise below 10 Hz. - In order to detect more abundant gravitational wave sources, space - based gravitational wave detection missions (such as LISA, DECIGO, Tianqin, Taiji, etc.) have been proposed, and these missions require high - precision laser interferometry in space. 2. **Main noise sources**: - **Laser frequency noise**: Fluctuations in laser frequency will introduce noise, and its intensity is about 7 orders of magnitude higher than that of a typical gravitational wave signal. - **Clock noise**: Asynchrony and jitter of the clocks used to trigger the digital sampling process will also introduce noise, and its intensity is about 3 orders of magnitude higher than that of a typical gravitational wave signal. ### Solutions - **Time - Delay Interferometer technique (TDI)**: - TDI constructs a virtual equal - arm interferometer by combining multiple data streams, thereby effectively reducing laser frequency noise. - Use an electro - optic modulator (EOM) to transmit local clock noise to a remote spacecraft, thereby constructing a clock comparison chain to further suppress clock noise. ### Experimental verification - **Experimental setup**: - Simulate laser interferometry between two spacecrafts. Each spacecraft carries a laser, an independent clock, a phase meter, and an EOM - based clock transmission chain. - Introduce a weak displacement signal at the picometer level, which is achieved by driving the mirror with a piezoelectric ceramic (PZT). - **Experimental results**: - Through the TDI post - processing technique, the laser frequency noise was successfully reduced by about 5 orders of magnitude, and the clock noise was reduced by about 2 orders of magnitude. - Finally, a real displacement signal with an average amplitude of about 60 picometers and a period of 1 second was recovered. ### Conclusion This research verifies the effectiveness of the TDI technique in space - based gravitational wave detection, and proves that even in the presence of a large amount of laser frequency noise and clock noise, weak picometer - level signals can still be recovered through post - processing techniques. This achievement provides important technical support and theoretical basis for future space - based gravitational wave detection missions.

Experimental demonstration of picometer level signal extraction with time-delay interferometry technique

Proof-of-principle Experimental Demonstration of Time-delay-interferometry for Chinese Space-borne Gravitational Wave Detection Missions

Time delay interferometry with a transfer oscillator.

Experimental demonstration of weak-light inter-spacecraft clock jitter readout for TianQin

Refined Clock Jitter Reduction in the Sagnac Type Time Delay Interferometry Combinations

Absolute Ranging with Time Delay Interferometry for Space-Borne Gravitational Wave Detection

Influence of EOM sideband modulation noise on space-borne gravitational wave detection

Clock noise evaluation of space-based gravitational wave detectors based on time-delay interferometry

Suppression of Clock-Jitter Noise and Laser Phase Noise in Arm Locking

Enhancing noise characterization with robust time delay interferometry combination

Experimental demonstration of constant amplitude modulation heterodyne interferometry

Time delay interferometry with minimal null frequencies

Time delay interferometry combination with zero-response

Research and analysis of a laser pointing jitter noise suppression system more compatible with space gravitational wave detection

Picometer-level quadrangle optical bonding bench for testing interferometric technologies in TianQin

Real-Time Synchronization of Clocks at Femtosecond Level Through a 113 Km-Free-space Link

Nearly-Continuous Kilometer-Scale Free-Space Optical Frequency Comparison in the Presence of Doppler Shift

Experimental Demonstration of Non-Reciprocity Effects on Satellite-Based Two-Way Time-Frequency Transfer Links