Abstract:The proposed space-borne laser interferometric gravitational wave (GW) observatory TianQin adopts a geocentric orbit for its nearly equilateral triangular constellation formed by three identical drag-free satellites. The geocentric distance of each satellite is ≈1.0×105 km, which makes the armlengths of the interferometer be ≈1.73×105 km. It is aimed to detect the GWs in 0.1 mHz–1 Hz. For space-borne detectors, the armlengths are unequal and change continuously which results in that the laser frequency noise is nearly 7–8 orders of magnitude higher than the secondary noises (such as acceleration noise, optical path noise, etc.). The time delay interferometry (TDI) that synthesizes virtual interferometers from time-delayed one-way frequency measurements has been proposed to suppress the laser frequency noise to the level that is comparable or below the secondary noises. In this work, we evaluate the performance of various data combinations for both first- and second-generation TDI based on the five-year numerically optimized orbits of the TianQin’s satellites which exhibit the actual rotating and flexing of the constellation. We find that the time differences of symmetric interference paths of the data combinations are ∼10-8 s for the first-generation TDI and ∼10-12 s for the second-generation TDI, respectively. While the second-generation TDI is guaranteed to be valid for TianQin, the first-generation TDI is possible to be competent for GW signal detection with improved stabilization of the laser frequency noise in the concerned GW frequencies.

Picometer-level quadrangle optical bonding bench for testing interferometric technologies in TianQin

Verification of Laser Heterodyne Interferometric Bench for Chinese Spaceborne Gravitational Wave Detection Missions

Study on Picometer-Level Laser Interferometer Readout System in TianQin Project

Picometer-stable hexagonal optical bench to verify LISA phase extraction linearity and precision

Experimental demonstration of weak-light inter-spacecraft clock jitter readout for TianQin

The facilities and performance of TianQin laser ranging station

Advanced pure tilt actuator for testing tilt-to-length coupling in space-based gravitational wave detection

A Laser Interferometer Prototype with Pico-Meter Measurement Precision for Taiji Space Gravitational Wave Detection Missionin China

Ultraprecision intersatellite laser interferometry

Optical System Design of Inter-Spacecraft Laser Interferometry Telescope

Design and performance test of the spaceborne laser in the TianQin-1 mission

Design and Construction of the Optical Bench Interferometer for the Taiji Program

Design of an Optical Testbed for In-Lab Testing and Validation for the Intersatellite Lasercom Terminals

Laboratory demonstration of an off-axis optical bench design for future gravity missions

Experimental Demonstration of Sub-100 Picometer Level Signal Extraction with Time-Delay Interferometry Technique

A picometer-class displacement metrology system using photonic integrated circuit

Quasi-monolithic Compact Interferometric Sensor Head Design with Laser Auto-alignment

Experimental demonstration of picometer level signal extraction with time-delay interferometry technique

Orbital effects on time delay interferometry for TianQin

A Wavelength-Stabilized and Quasi-Common-Path Heterodyne Grating Interferometer With Sub-Nanometer Precision