Abstract:The ongoing development of the space-based laser interferometer missions is aiming at unprecedented gravitational wave detections in the millihertz frequency band. The spaceborne nature of the experimental setups leads to a degree of subtlety regarding the otherwise overwhelming laser frequency noise. The cancellation of the latter is accomplished through the time-delay interferometry technique. Moreover, to eventually achieve the desired noise level, the phase fluctuations of the onboard ultrastable oscillator must also be suppressed. This can be fulfilled by introducing sideband signals which, in turn, give rise to an improved cancellation scheme accounting for the clock-jitter noise. Nonetheless, for certain Sagnac-type interferometry layouts, it can be shown that resultant residual clock noise found in the literature can be further improved. In this regard, we propose refined cancellation combinations for two specific clock noise patterns. This is achieved by employing the so-called geometric time-delay interferometry interpretation. It is shown that for specific Sagnac combinations, the residual noise diminishes significantly to attain the experimentally acceptable sensitivity level. Moreover, we argue that the derived combination, in addition to the existing ones in the literature, furnishes a general-purpose cancellation scheme that serves for arbitrary time-delay interferometry combinations. The subsequential residual noise will only involve factors proportional to the commutators between the delay operators. Our arguments reside in the form of the clock noise expressed in terms of the coefficients of the generating set of the first module of syzygies, the linear combination of which originally constitutes the very solution for laser noise reduction.

Experimental Demonstration of Sub-100 Picometer Level Signal Extraction with Time-Delay Interferometry Technique

Experimental demonstration of picometer level signal extraction with time-delay interferometry technique

Proof-of-principle Experimental Demonstration of Time-delay-interferometry for Chinese Space-borne Gravitational Wave Detection Missions

Experimental demonstration of weak-light inter-spacecraft clock jitter readout for TianQin

Time Delay Interferometry Using Laser Frequency Comb As the Direct Signal Source

Time delay interferometry with a transfer oscillator.

Study on Picometer-Level Laser Interferometer Readout System in TianQin Project

Absolute Ranging with Time Delay Interferometry for Space-Borne Gravitational Wave Detection

Clock Noise Reduction in Geometric Time Delay Interferometry Combinations

Refined Clock Jitter Reduction in the Sagnac Type Time Delay Interferometry Combinations

Influence of EOM sideband modulation noise on space-borne gravitational wave detection

Weak-Light Phase-Locking Time Delay Interferometry with Optical Frequency Combs.

Enhancing noise characterization with robust time delay interferometry combination

Clock noise evaluation of space-based gravitational wave detectors based on time-delay interferometry

Suppression of Clock-Jitter Noise and Laser Phase Noise in Arm Locking

Picometer-level quadrangle optical bonding bench for testing interferometric technologies in TianQin

Time delay interferometry with minimal null frequencies

Research and analysis of a laser pointing jitter noise suppression system more compatible with space gravitational wave detection

Experimental demonstration of constant amplitude modulation heterodyne interferometry