Abstract:Accurate measurement of CO2 generated from different emission sources is the basis for controlling CO2 emissions and mitigating global warming. With advantages of high accuracy and rapid response, isotope analyzers using spectroscopic techniques, particularly those using cavity ring-down spectroscopy, have been widely used for CO2 emissions monitoring. However, these analyzers often face challenges such as spectral interference from impurity gases and unstable temperature control within the optical cavity in isotope analyzers. To address these challenges, this paper proposes a low-temperature optical cavity scheme utilizing a split Stirling-type pulse tube cryocooler. Combining thermal boundary conditions with particle swarm optimization, a dynamic cooling and temperature control model of the optical cavity was established in MATLAB. The model subsequently analyzed the cooling process, temperature control, and stability of the optical cavity. After 120 h, the simulations showed that the central part of the optical cavity had cooled to 126.4 K with a heat leakage of 8.90 W, in agreement with the experimental results that stabilized at 126.8 K. The temperature fluctuations remained within 0.1 K/h while controlling an overall temperature of 170 K with a temperature difference of +/- 5 K. Changes in the electrical input power of cryocooler had no influence on the temperature distribution. This advancement not only lowers the operating temperature of the optical cavity to minimize spectral interference but also enhances the precision and efficiency of temperature control.

Investigation on the thermal property of a hydroxide catalysis bonded cryogenic cavity

A hybrid silicon-sapphire cryogenic Fabry-Perot cavity using hydroxide catalysis bonding

Design and realization of a 3-K cryostat for a 10-cm ultrastable silicon cavity

An ultra-stable cryogenic sapphire cavity laser with an instability of $1.9\times10^{-16}$ based on a low vibration level cryostat

Cryogenic sapphire optical reference cavity with crystalline coatings at $\mathrm{ 1 \times 10^{-16}}$ fractional instability

Numerical Simulation and Experimental Verification of Dynamic Cooling and Temperature Control of the Optical Cavity in a Co2 Isotope Analyzer

Vibration Property of a Cryogenic Optical Resonator within a Pulse-Tube Cryostat

Cryogenic sapphire optical reference cavity with crystalline coatings at 1 × 10-16 fractional frequency instability

An Ultrastable 1397-Nm Laser Stabilized by a Crystalline-Coated Room-Temperature Cavity.

Towards a sub-kelvin cryogenic Fabry-Perot silicon cavity

An Ultra-Stable Laser Based on a Room-Temperature Optical Cavity with Crystalline Coatings

Ultrastable lasers: investigations of crystalline mirrors and closed cycle cooling at 124 K

Ultrastable vacuum-gap Fabry-Pérot cavities operated in air

Ultra-high Melting Point Ho3+, Yb3+ Co-Doped HfO2 Single-Crystal Fibers for High-Precision and Robust Ratiometric Thermometry Towards Harsh Environments

Cryogenic photonic resonator with $10^{-17}$/s drift

A highly stable and fully tunable open microcavity platform at cryogenic temperatures

Compact Frequency-Stabilization Scheme for Laser Cooling of Polar Molecules

A mechanically stable and tunable cryogenic Fabry-Perot microcavity

Ultra-stable laser with average fractional frequency drift rate below $5\times10^{-19}/\mathrm{s}$

Optical Properties of Direct Wafer Bonded Micro-Cavity Structures

Multi-Phase Hfo2:Ho/Yb/Y Single-Crystal Fibers for Ratiometric Thermometry: Growth and Phase Dependence Investigation