Abstract:In situ measurement of high temperature is critical in aerospace, petrochemical, metallurgical, and power industries. The single-crystal sapphire fiber is a promising material for high-temperature measurement owing to its high melting point of ∼2045 °C. Sapphire fiber Bragg gratings (SFBGs), which could be inscribed in sapphire fibers with a femtosecond laser, are widely used as high-temperature sensors. However, conventional SFBGs typically exhibit a significant deterioration in their spectra after long-term operation at ultra-high temperatures, resulting from the formation of some unwanted microstructural features, that is, lossy spots and micro-etched lines, on the surface of the sapphire fiber. Here, we report for the first time, to the best of our knowledge, a thermally stabilized ultra-high-temperature sensor based on an SFBG created by femtosecond laser inscription, inert gas-sealed packaging, and gradient temperature-elevated annealing. The results indicate that the lossy spots are essentially aluminum hydroxide induced by high-temperature oxidation, and the inert gas-sealed packaging process can effectively insulate the sapphire fiber from the ambient air. Moreover, the formation of micro-etched lines was suppressed successfully by using the gradient temperature-elevated annealing process. As a result, the surface topography of the SFBG after operating at high temperatures was improved obviously. The long-term thermal stability of such an SFBG was greatly enhanced, showing a stable operation at 1600 °C for up to 20 h. In addition, it could withstand an even higher temperature of 1800 °C with a sensitivity of 41.2 pm/°C. The aforementioned results make it promising for high-temperature sensing in chemical, aviation, smelting, and power industries.

A hybrid silicon-sapphire cryogenic Fabry-Perot cavity using hydroxide catalysis bonding

Study on Performance Stability of the Sapphire Fiber and Cladding under High Temperature

Investigation on the thermal property of a hydroxide catalysis bonded cryogenic cavity

Temperature Dependence of the Mechanical Dissipation of Gallium Bonds for Use in Gravitational Wave Detectors

Cascaded Fabry-Perot cavity and fiber Bragg grating on sapphire fibers for high-temperature strain sensing

Mechanical strength and millimeter-wave transmittance spectrum of stacked sapphire plates bonded by sodium silicate solution

Design and realization of a 3-K cryostat for a 10-cm ultrastable silicon cavity

Towards a sub-kelvin cryogenic Fabry-Perot silicon cavity

Comparison of Measurements with Finite-Element Analysis of Silicon-Diaphragm-Based Fiber-Optic Fabry–Perot Temperature Sensors

Enabling cryogenic gravitational wave detectors: growth of sapphire crystals with record low absorption in the near infrared

Design, Fabrication, Characterization, and Application of an Ultra-High Temperature 6H-Sic Sapphire Fiber Optic Vibration Sensor

Hybrid Sapphire Dual-Fabry—Perot-Cavities Sensor for High Temperature and Refractive Index Measurement

In-Situ Low-Temperature Bonding for Silicon-on-Quartz Substrates

An ultra-stable cryogenic sapphire cavity laser with an instability of $1.9\times10^{-16}$ based on a low vibration level cryostat

Stabilized Ultra-High-Temperature Sensors Based on Inert Gas-Sealed Sapphire Fiber Bragg Gratings

High Mechanical Q-factor Measurement of Si Using a 3D Cantilever Support.

Fabrication of micro fluidic cavities using Si-to-glass anodic bonding

Langasite Bonding via High Temperature for Fabricating Sealed Microcavity of Pressure Sensors

A High Temperature Sensor Based on Sapphire Fiber Fabry-Perot Interferometer

Fabrication of sol-gel derived cladding for sapphire fibers and their performance evaluation under harsh environment

A mechanically stable and tunable cryogenic Fabry-Perot microcavity