Abstract:CrN, CrTiN, and CrTiBN coatings were deposited onto 316 stainless steel substrates using multi-arc ion plating techniques. Their morphology, microstructures, friction performance, and corrosion resistance in simulated seawater were systematically characterized. After being analyzed with X-ray diffraction, X-ray photoelectron spectroscopy, and scanning electron microscopy, the results revealed that CrN coatings had a primary face-centered cubic CrN structure. Following the addition of Ti and B elements, CrTiBN coatings exhibited a cross-sectional structure with hexagonal TiB2 and amorphous BN, displaying the most compact structure. Electrochemical impedance spectroscopy tests indicated that CrTiBN coatings had the highest polarization resistance, the highest phase angle, and the widest frequency range. During electrochemical polarization curve tests, CrTiBN coatings displayed a corrosion potential of 0.11 V, a polarization resistance of 2470 kΩ·cm2, and a minimal corrosion current of 1.94 × 10−8 A/cm2, demonstrating outstanding corrosion resistance. The results from the friction tests indicated that CrTiBN coatings exhibited the lowest friction coefficients of 0.16 and wear rates of 8.18 × 10−7 mm3/Nm. Insights gained from electrochemical friction–corrosion tests revealed that CrTiBN coatings maintained the highest Open Circuit Potential (OCP) throughout the corrosion and friction process. In summary, the introduction of Ti and B has clearly enhanced the friction and corrosion resistance properties of CrTiBN coatings in comparison to CrN coatings.

Long-term corrosion resistance and friction-induced antibacterial enhancement of CrMoSiCN coating on Ti6Al4V alloy

Tribo-induced antibacterial and electrochemical performances of CrMoSiCN/Ag coatings in seawater

The enhancement of individual friction and corrosion properties of CrSiN coatings by Mo doping in seawater

Electrochemical corrosion and tribological properties of CrMoCN coatings sliding against Al2O3 balls in artificial seawater

Structure and tribocorrosion behavior of CrMoSiCN nanocomposite coating with low C content in artificial seawater

Tribocorrosion characteristics of CrMoSiCN/Ag coatings on Ti6Al4V alloys in seawater

Structural, mechanical and tribocorrosion performances of CrMoSiN coatings with various Mo contents in artificial seawater

Corrosion and friction behaviours of MoSi 2 /MoS 2 nanoparticles incorporated tinted coating on Ti6Al4V alloy

Tribological and electrochemical properties of Cr–Si–C–N coatings in artificial seawater

Study on Friction and Corrosion Performance of CrTiBN Coating in Artificial Seawater Environment

Surface tribological and electrochemical properties of TiAlSiN coating in seawater

Microstructure, mechanical properties and tribo-corrosion mechanism of (CrNbTiAlVMo) x N 1-x coated 316 L stainless steel in 3.5 wt.% NaCl solution

A comparative analysis of different surface tribological and electrochemical properties of TiAlN, TiAlSiN, and CrAlN thin film coatings in seawater

Effect of CrYN/TiBN coating on friction performance and corrosion resistance of 316 Stainless Steel in artificial seawater

Facile preparation and tribological property of alloyed Fe3Si coatings on stainless steels surface by molten-salt infiltration method

Tribological behavior of detonation sprayed CrFeNiAl0.3Ti0.3 high entropy alloy coatings in seawater environment

Comparisons of tribological and electrochemical properties of CrSiC and CrSiCN coatings in seawater

Designing Cu chemical distribution in Ti(AlCu)N coatings for enhanced erosion-corrosion and antibacterial performance

Corrosion-resistant behavior and structural optimization of Ti/Cr, Ti/Cu, Cr/Cu , Ti/Cr/Cu multimetallic layer coatings in simulated seawater

Electrochemical Behavior of (cr, W, Al, Ti, Si)N Multilayer Coating on Nitrided AISI 316L Steel in Natural Seawater

Improved corrosion protection of CrN hard coating on steel sealed with TiOxNy-TiN composite layers