Abstract:Rising concentration of anthropogenic CO2 in the atmosphere and oceans challenges the ecological balance of Earth. The rising availability of green electricity from renewable energy resources presents a unique opportunity to remove and store CO2 as durable solid carbonates by utilizing Mg- and Ca-rich seawater and electrochemistry. Nonetheless, the design of electrochemical systems and product selectivity remain unresolved challenges in maximizing the potential of this pathway. Herein, we developed an electrochemical approach that operates sequentially in two modes to selectively precipitate magnesium hydroxide and calcium carbonate under ambient conditions. The yields of Mg(OH)2 and CaCO3 using titanium mesh electrodes at applied potentials of −2.5 V versus Ag/AgCl are as high as 87% and 90%, in the absence and presence of CO2 in the gas phase, respectively. The purities of Mg(OH)2 and CaCO3 after the two-mode electrolysis are as high as 96.8% and 96.5%, respectively. The ease of operation, absence of external chemical reagents, adaptability for resource recovery from seawater and industrial wastewater make this approach uniquely suited for modular deployment. Moreover, simulated brine and flue gas are investigated to demonstrate the adaptability of this technology for industrial application. It is found that the presence of sulfate can influence both the product purity and their associated efficiencies, due to the formation of sulfide byproduct. An electrochemical pathway is developed for brine partial desalination, resource recovery, and CO2 capture and mineralization for the selective precipitation of high-purity calcium carbonate and magnesium hydroxide. In this two-mode electrolysis, magnesium and calcium are separately recovered with efficiencies as high as 87% and 90%, respectively. This approach is a significant advance over existing pathways that do not selectively precipitate calcium carbonate and magnesium hydroxide from brine. The behavior of sulfate ions in simulated brine is also investigated. The use of industrial titanium mesh as an electrode presents an easy fabrication, effective, and durable material option for deploying this approach. The ease of operation, absence of external chemical reagents, adaptability for resource recovery from seawater and industrial wastewater, and increasing availability of low cost and low carbon electricity sourced from renewable energy resources make this approach uniquely suited for modular deployment.

Collaborative disposal of problematic calcium ions in seawater and carbon and sulfur pollutants in flue gas by bipolar membrane electrodialysis

Bipolar membrane electrodialysis combined with ozone oxidation wet scrubbing to remove SO2 and NO from flue gas and achieve CO2 mineralization

A Semi-Wet Technological Process for Flue Gas Desulfurization by Corona Discharges at an Industrial Scale

Electro mitigation of calcium carbonate and calcium sulfate scaling in an optimized thermal conductive membrane distillation process

Regenerating flue-gas desulfurizing agents by bipolar membrane electrodialysis

Electrochemical recovery of high-purity calcium carbonate and magnesium hydroxide from brine via carbon mineralization

Revealing the brick-laying process of foulants layer in membrane distillation for desulfurization wastewater treatment: Insight into the mineral scaling

Insight into the magnetic lime coagulation-membrane distillation process for desulfurization wastewater treatment: From pollutant removal feature to membrane fouling

Synergy of feed-side aeration and super slippery interface in membrane distillation for enhanced water flux and scaling mitigation

Chloride Ion Removal from the Wet Flue Gas Desulfurization and Denitrification Wastewater Using Friedel’s Salt Precipitation Method

Bipolar membrane electrodialysis integrated with in-situ CO2 absorption for simulated seawater concentrate utilization, carbon storage and production of sodium carbonate

Mixed scaling deconstruction in vacuum membrane distillation for desulfurization wastewater treatment by a cascade strategy

Treatment of Flue Gas Desulfurization Wastewater by a Coupled Precipitation-Ultrafiltration Process

Sustainable disposal of seawater brine by novel hybrid electrodialysis system: Fine utilization of mixed salts

An Efficient Method for Carbon Dioxide Sequestration Using Semidry Flue Gas Desulfurization Ash

Recovering chemical sludge from the zero liquid discharge system of flue gas desulfurization wastewater as flame retardants by a stepwise precipitation process

Synergistic approach for carbon dioxide capture and reject brine treatment: Integrating selective electrodialysis and bipolar membrane electrodialysis

Direct CO 2 mineralization using seawater reverse osmosis brine facilitated by hollow fiber membrane contactor

Separation of Chloride and Sulfate Ions from Desulfurization Wastewater Using Monovalent Anions Selective Electrodialysis

Proof of concept: Integrated membrane distillation-forward osmosis approaches water production in a low-temperature CO2 capture

Simultaneous water softening and selective ammonia nitrogen recovery from coal gasification gray water using an innovative four-chamber flow-electrode electrochemistry system