Abstract:Capture and conversion of CO2 from anthropogenic emission is becoming an increasingly important social responsibility as the concentration of atmospheric CO2 continues to rise above record high levels. To achieve carbon negative conditions in the long term, capture and extraction of CO2 directly from air and seawater will likely play a much bigger role. The concentration of the present CO2 in the atmosphere is ~400 ppm, or 0.00079 kg m−3. As a result, a large volume of air needs to be processed in direct air capture processes. In contrast, world ocean constitutes the largest carbon sink, absorbing about 40% of anthropogenic CO2 since the beginning of industrial era with an effective CO2 concentration of 2.1 mmol kg−1, or 0.095 kg m−3 in seawater, which is a factor of 120 times larger than in the atmosphere. Thus, extraction of CO2 from seawater provides an alternative and unique approach in the global carbon removal technological landscape. Herein, a new bipolar membrane electrodialysis (BPMED) cell design, in which the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) at the electrodes were replaced with reversible redox couple reactions with minimal thermodynamic and kinetic voltage losses, was designed, constructed and evaluated. At an operating current density of 3.3 mA cm−2, and a seawater flow rate of 37 ml min−1, a record low electrochemical energy consumption of 155.4 kJ mol−1 or 0.98 kWh kg−1 of CO2 was achieved. The demonstrated BPMED cell also exhibited a high CO2 extraction efficiency of 71% of total dissolved inorganic carbon (DIC). We also demonstrated, for the first time, the direct coupling between the CO2 extraction from seawater via BPMED and electrochemical CO2 reduction (CO2R) into fuels and chemicals. The outlet CO2 stream from the BPMED was fed into tandem custom-built vapor-fed GDE cells to first perform the oxygen reduction reaction (ORR) using a nanoparticle Ag-based catalyst followed by CO2R using Cu or Ag as the electrocatalyst. This configuration allowed us to convert CO2 from seawater to fuels and valuable chemicals such as carbon monoxide, ethylene, ethanol, and propanol with total Faradaic efficiency (FE) of up to 73% at current densities of 58 mA cm−2 using CO2R Cu electrocatalyst and to carbon monoxide with selectivity of up to 95% at current densities of 11.15 mA cm−2 using CO2R Ag electrocatalyst. Figure 1

Bipolar membrane electrodialysis integrated with in-situ CO2 absorption for simulated seawater concentrate utilization, carbon storage and production of sodium carbonate

Carbon dioxide capture coupled with magnesium utilization from seawater by bipolar membrane electrodialysis

Recovery of Acid and Base from Sodium Sulfate Containing Lithium Carbonate Using Bipolar Membrane Electrodialysis

A Coupled Electrochemical System for CO2 Capture, Conversion and Product Purification

Simultaneous Co2 Capture and Amino Acid Production Using Bipolar Membrane Electrodialysis (Bmed)

Pure-Water-Fed Forward-Bias Bipolar Membrane CO 2 Electrolyzer

Synergistic approach for carbon dioxide capture and reject brine treatment: Integrating selective electrodialysis and bipolar membrane electrodialysis

Electrochemical Extraction and Conversion of CO2 from Seawater

CO2-mediated Bicarbonate Conversion to Concentrated Formate in a CEM-based Electrolyzer

Bipolar membrane electrolyzers enable high single-pass CO2 electroreduction to multicarbon products

An Innovative Beneficial Reuse of Seawater Concentrate Using Bipolar Membrane Electrodialysis

Advancements in Bipolar Membrane Electrodialysis Techniques for Carbon Capture

Bipolar membrane electrodialysis combined with ozone oxidation wet scrubbing to remove SO2 and NO from flue gas and achieve CO2 mineralization

Power-free Bipolar Membrane Electrodialysis for Acid-Alkali Production in River Estuaries

Separation and Conversion of CO2 Reduction Products into High-Concentration Formic Acid Using Bipolar Membrane Electrodialysis

Seawater alkalization via an energy-efficient electrochemical process for CO2 capture

A Direct Electrochemical Substitution Electrodialytic System for CO2 Conversion into High Value-Added Soda

A direct electrochemical substitution electrodialytic system for CO 2 conversion into high value-added soda

CO 2 -mediated bicarbonate conversion to concentrated formate in a CEM-based electrolyzer

Electrolytic Regeneration of Decarbonising Potassium Carbonate Solution

Retrieval of CO2 from a carbonate solution for its sequestration by a novel electrochemical decarbonizing and ingathering method