Abstract:<p>Sn58-xBi-xAl-xZn were prepared by adding different addition (x = 0, 1.0, 2.0, and 3.0 wt%) of Al and Zn, and their response to melting point, microstructure, phase structure and mechanical properties were investigated. The presence of Sn-Bi-Zn eutectic significantly reduces the melting point of the alloy, but the heat fusion is increased with the increase of Zn and Al addition. The Al element is dispersed in the SnBi eutectic matrix in the form of dendritic Al-rich phase, and the Zn element is dispersed in the form of needle-like Zn-rich phase. Besides, the addition of Al and Zn leads to the refinement of the eutectic structure and the reduction of the interlaminar spacing. The Al, Zn, and Bi can be dissolved in Sn to form β-Sn phase. The competition of Al, Zn, and Bi solubilizes in Sn results in the diffraction peak of the alloy to shift. The doping of Al and Zn in Sn causes the diffraction peak of the alloy to shift to the right, but when the proportion of Bi solubilizes in Sn increases, the diffraction peak of the alloy shifts to the left. The phase interface of Sn and Bi is the non-coherent interface. The mismatch degrees between (200) Sn and (10<span class="math"><math>2¯</math></span>) Bi is 27.5%. The liquid metal induced embrittlement (LMIE) phenomenon can be observed between Al grain and Sn phase, which leads to brittle fracture of Al grains. With the increase of Al and Zn content, the mechanical properties are significantly improved. When the Al and Zn addition reaches 2 wt%, the ultimate tensile strength (UTS) of Sn56Bi2Al2Zn reaches 68.5 MPa, while the elongation reaches 49.04%, which is 22.76% and 46.34% higher than that of Sn58Bi. However, when the Al and Zn addition reaches 3 wt%, the Sn56Bi3Al3Zn possess the best UTS (70.5 MPa), but the plasticity is reduced to 26.80%. Moreover, the macroscopic hardness of Sn55Bi3Al3Zn is 25.3 HV, which is 22.2% higher than that of Sn58Bi (20.7 HV). Results show that the endogenous Al and Zn phases plays an important role in the mechanical properties of Sn58Bi.</p>

Growth dynamics of the segregated phase in Zn-6 wt%Bi immiscible alloy superheated in super high static magnetic field

Controlling Droplet Distribution Using Thermoelectric Magnetic Forces During Bulk Solidification Processing of a Zn–6 Wt.%bi Immiscible Alloy

Effect of Vertical High Magnetic Field on the Morphology of Solid-Liquid Interface during the Directional Solidification of Zn-2wt.%Bi Immiscible Alloy

Effects of high static magnetic field on the microstructure of Zn-Bi monotectic alloys during directional solidification process

Tailoring homogeneous immiscible alloy via magneto-Archimedes levitation

Non-Equilibrium Crystallization of Monotectic Zn-25%Bi Alloy under 600 g

The segregated structure of MnBi in Bi–Mn alloy solidified under a high magnetic field

Constitutional supercooling and corresponding microstructure transition triggered by high magnetic field gradient during directional solidification of Al-Fe eutectic alloy

Effects of transverse magnetic field during directional solidification of monotectic Al-6.5wt%Bi alloy

Characterization of the Microstructure Evolution and Microsegregation in A Ni-Based Superalloy under Super-High Thermal Gradient Directional Solidification

Precipitation and Growth Simulation of Γ′ Phase in Single Crystal Superalloy DD6 with Multiphase-Field Method and Explicit Nucleation Algorithm

Influence of high magnetic field on the liquid-liquid phase separation behavior of an undercooled Cu–Co immiscible alloy

Properties and microstructural evolution of a ternary Cu–Co–Fe immiscible alloy solidified under high magnetic fields

A Full View of the Segregation Evolution in Al–Bi Immiscible Alloy

Tailoring the microstructure and properties of a Cu–Co immiscible alloy by high magnetic field assisted heat treatment

In Situsynchrotron Study of Liquid Phase Separation Process in Al-10 Wt.% Bi Immiscible Alloys by Radiography and Small Angle X-ray Scattering

Microstructure and Microsegregation in A Ni-Based Single Crystal Superalloy Directionally Solidified under High Thermal Gradient

Effect of a High Magnetic Field on the Growth of Ternary Al-Cu-Ag Alloys During Directional Solidification

Dynamic behaviors of minor droplets and the role of bubbles in phase-separating Al Bi immiscible alloy

Solute segregation behavior of nickel-based single crystal superalloys directionally solidified under transverse static magnetic field

Effects of endogenous Al and Zn phases on mechanical properties of Sn58Bi eutectic alloy