Abstract:Tungsten is considered as the preferred material for plasma-oriented materials in fusion reactors, and its ultra-precision machining is a concern at present. However, the critical cutting depth for chip generation is an important parameter affecting the surface formation and removal behavior of materials in ultra-precision machining. Herein, the simulation analysis of nano-cutting tungsten using molecular dynamics (MD) was performed, and a new method to determine the minimum uncut chip thickness h min by identifying the atomic trajectory and calculating the relative coordinate value was proposed. Then, the effects rarely reported of the chip formation on the removal mechanism of tungsten were studied. The research showed that when the cutting depth h was 0.253 times of the cutting edge radius r, the critical cutting depth without chip was reached, namely h min. The increasing cutting temperature and stress led to the decrease of machined surface quality and the increase of subsurface damage with the rising in h/r. Meanwhile, the dislocation slip dominated by the direction of 1/2<111> was the main plastic deformation mechanism during cutting without chip, but the dislocation slip dominated by direction of <100> was main plastic deformation mechanism during processing with chip. The plastic deformation dominated by dislocation slip was also accompanied by the amorphization. The dislocation reaction from 1/2<111> dislocation to <100> dislocation occurred under both energy and geometry conditions. Moreover, the dislocations had more energy to expand and evolve as a result of thermal-activated effect induced by elevated cutting force and temperature, which increased the dislocation density, depth of subsurface damage layer, and the stress variation degree of the machined area with the enhancement of h min during cutting. This research provides a reference method for determining the minimum uncut chip thickness during material removal and is of significance for mastering the microscopic removal mechanism of tungsten.

Material removal mechanism of FCC single-crystalline materials at nano-scales: Chip removal & ploughing

Unification of Face-Centered-Cubic Crystalline Material Removal Mechanisms in Microscale and Nanoscale Single-Point Machining

Material removal behaviors of FCC metals in nanoscale and microscale scratching: theoretical model and experiments

Towards Understanding the Machining Mechanism of the Atomic Force Microscopy Tip-Based Nanomilling Process

Surface Generation Mechanism of Monocrystalline Materials under Arbitrary Crystal Orientations in Nanoscale Cutting

Investigate on Material Removal of 3C-Sic Crystals in Nano-Polishing Via Molecular Dynamics

Crystal plasticity finite element modeling and simulation of diamond cutting of polycrystalline copper

Effects of microstructures on the material removal mechanisms in nanomachining of polycrystalline materials

The removal mechanism transformation from crystalline to amorphous in nano-machining Cu-Al alloy

MOLECULAR DYNAMICS SIMULATIONS OF NANOMA-CHINING MECHANISM AND THERMAL EFFECTS OF SINGLE CRYSTAL Cu

Modelling and experimental investigation on nanometric cutting of monocrystalline silicon

Effect of tool rake angle on the material removal mechanism transition of single-crystal silicon: a molecular dynamics study

MD Simulation of Effect of Crystal Orientation and Cutting Direction on Nanometric Cutting Using AFM Pin Tool

Nanoscale removal mechanisms in abrasive machining of brittle solids

Md Simulation of Nanocutting Process: Removal Mechanism, Defects Evolvement and Characterization

Mechanism of Material Removal and the Generation of Defects by Md Analysis in Three-Dimensional Simulation in Abrasive Processes

Effects of minimum uncut chip thickness on tungsten nano-cutting mechanism

MOLECULAR DYNAMICS SIMULATION OF NANOMETRIC CUTTING CHARACTERISTICS OF SINGLE CRYSTAL Cu

Atomistic Simulation Study of Nanoparticle Effect on Nano-Cutting Mechanisms of Single-Crystalline Materials

Molecular dynamics simulations of nanomachining mechanism and thermal effects of single crystal Cu

Research on nano-scale material removal process using atomic force microscopy