Abstract:Because of higher power density and blocking voltage for Silicon Carbide (SiC) devices, careful insulation design is of much importance for future medium voltage power converters. Due to the insulation or mechanical coordination, surface defects (metal-insulation-air interface problem) inside the converters or high voltage PCB boards cannot be avoided. It is undeniable that the final design should be Partial Discharge (PD) free under normal operation with a safety margin. However, the traditional PD detection method could be ineffective or insensitive because of the serious disturbance of displacement current under fast rising repetitive square voltage, which leads to great difficulty in PD-based insulation assessment. Moreover, PD characteristics and mechanism of surface defects under PWM-like voltage, which contribute to guide the insulation design, also has not been understood clearly. For these purposes, this paper proposes a Silicon Photomultiplier (SiPM) based optical PD detection method firstly, which is suitable for offline or online PD detection and diagnosis under PWM-like voltage because of the advantages of small size, high gain, good sensitivity and high Electromagnetic Interference (EMI) immunity. Then, PD characteristics of artificial surface discharge model under PWM-like excitation are investigated and the relationship between the PD activities (average discharge magnitude and repetition rate) and the PWM-like excitation parameters (rising time, amplitude and frequency) has been explored. Finally, the proposed SiPM sensor is used for the insulation design and assessment of HV differential mode inductor. Experimental results indicate that space charge accumulation plays a great role in the surface discharge under PWM-like excitation.

Towards Optical Partial Discharge Detection with Micro Silicon Photomultipliers

Partial Discharge Multispectral Detection in Air with a SiPM-based Sensor

Optical Partial Discharge Diagnosis in SF6 Gas-Insulated System with SiPM-Based Sensor Array

Multispectral Detection of Partial Discharge in SF6 Gas with Silicon Photomultiplier-Based Sensor Array

Partial Discharge Detection and Assessment of Surface defects under Fast Rising Repetitive Square Voltage for MV Converter Application

A New Optical Method of Partial Discharge Distant Positioning in GIS

Multispectral Optical Partial Discharge Detection, Recognition, and Assessment

A Study on Partial Discharge Measurement Based on the Optical Current Sensor

Statistical Analysis of Partial Discharges in SF6 Gas Via Optical Detection in Various Spectral Ranges

Partial Discharge Ultrasonic Detection Based on Sagnac Optical Interference Technique

Optical Partial Discharge Diagnostic in SF6 Gas Insulated System Via Multi-Spectral Detection.

Multispectral light pulse detection on partial discharges initiated by metal particle on insulator in SF<inf>6</inf> gas

Application of a Partial Discharge Diagnosis Method Based on the Novel Multispectral Array Sensor and GMM in Different Insulating Gases

Research on Characteristics of Typical Partial Discharge Pattern in GIS Based on SiPM

Multispectral Light Pulse Detection On Partial Discharges Initiated By Metal Particle On Insulator In Sf6 Gas

Optical Sensing Technology for Acoustic Detection of Partial Discharges: A Review

Optical Partial Discharge Detection and Diagnosis Method Based on PHOG Features

Current Situation and Development of Optical Detection for Partial Discharge

Partial Discharge Detection in Gas-Insulated Switchgears Using Sensors Integrated with UHF and Optical Sensing Methods

Partial discharge detection on power equipment using a magneto-resistive sensor

A Multiplexing Optical Partial Discharge Sensing System for Power Transformer Using a Single Photodetector