A Multiplexing Optical Partial Discharge Sensing System for Power Transformer Using a Single Photodetector

Hong-Yang Zhou,Guo-Ming Ma,Wei-Qi Qin,Meng Zhang,Qiang Zhang,Zhong-Qin Lin,Jun Jiang

DOI: https://doi.org/10.1109/tpwrd.2021.3053138

IF: 4.825

2021-06-01

IEEE Transactions on Power Delivery

Abstract:Optical ultrasonic sensor multiplexing for partial discharge (PD) detection based on a single photodetector is a challenging task. In this paper, we propose a novel multiplexed optical ultrasonic sensing system based on swept frequency interferometry. Optical ultrasonic sensor multiplexing is achieved using different carrier frequencies that depend on the length differences between the sensing fibers and the reference fiber. Only one photodetector is required for multiple-point optical fiber ultrasonic sensing. The experimental results indicate that the ultrasonic signals generated by a partial discharge defect model can be simultaneously detected. Then, the PD defect was accurately localized based on the arrival times of an ultrasonic signal at the multiplexed sensors.

engineering, electrical & electronic

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to implement a multiplexed optical ultrasonic sensing system using a single photodetector in power transformers to detect partial discharge (PD). Traditional ultrasonic detection methods have low sensitivity when detecting low - energy partial discharge pulses and require multiple photodetectors and data acquisition channels, resulting in high system costs. This paper proposes a new multiplexed optical ultrasonic sensing system based on swept - frequency interferometry technology, which can achieve multi - point fiber - optic ultrasonic sensing with only one photodetector, thereby significantly reducing the cost of the sensing system and improving the detection sensitivity.

Specifically, the system achieves multiplexing by using different carrier frequencies (these frequencies depend on the length difference between the sensing fiber and the reference fiber). Experimental results show that the system can simultaneously detect ultrasonic signals generated by the partial discharge defect model and accurately locate partial discharge defects based on the time when the ultrasonic signals reach the multiplexed sensor.