Temperature-Dependent Threshold Voltage Extraction of FinFETs Using Noise Measurements

Yunqiu Wu,Xu Chi,Fang Wang,Xusheng Liu,Jun Liu,Chenxi Zhao,Huihua Liu,Yiming Yu,Kai Kang

DOI: https://doi.org/10.1109/tmtt.2022.3159244

IF: 4.3

2022-07-05

IEEE Transactions on Microwave Theory and Techniques

Abstract:In this article, a temperature-dependent threshold voltage extraction method based on noise measurement is proposed. This method induces a mathematical solution for acquiring channel temperatures ( ) of transistors in the saturation region to extract threshold voltages. In order to gain accurate channel temperature, a small-signal equivalent circuit model was established to determine transconductance ( ). Then, the extracted transconductance and measured noise power spectral density (NPSD) were used to obtain channel temperatures. On this basis, the temperature-dependent threshold voltage ( ) was derived. To validate the reliability of this method, a four-Fin six-finger N-FinFET and a four-Fin eight-finger N-FinFET were fabricated using the 14-nm bulk FinFET technology. In this study, the scattering parameters were obtained from 0.2 to 40.2 GHz. Also, the NPSDs were measured from 1 to 500 Hz, while gate voltage and drain voltage were set as 0.3, 0.49, and 0.75 V. Besides, the transistor – characteristics was also investigated when drain–source bias voltage changed from 0.05 to 0.9 V. Compared with the measurement results, the calculation results of drain–source current model using temperature-dependent threshold voltage achieved higher accuracy. Also, the root mean square errors (RMSEs) were less than 0.60% for four-Fin six-finger N-FinFET and less than 0.51% for four-Fin eight-finger N-FinFET. Therefore, the proposed extraction method can be applied to - ccurately predict transistor temperature-dependent threshold voltage.

engineering, electrical & electronic