Carbon nanotubes as light absorbers in digital light processing three-dimensional printing of SiCN ceramics from preceramic polysilazane

Jun Xiao,Dongqing Liu,Haifeng Cheng,Yan Jia,Shen Zhou,Mei Zu
DOI: https://doi.org/10.1016/j.ceramint.2020.04.282
IF: 5.532
2020-08-01
Ceramics International
Abstract:<p>As a new method for producing dense ceramics with complex structures, digital light processing 3D printing technology has received considerable attention when applied to polymer-derived ceramics. In this study, using acrylate monomers, we developed a material system to modify the polysilazane preceramic polymers. Furthermore, during photopolymerization, the photocuring thickness was tuned using carbon nanotubes as light absorbers, thus improving the printing accuracy. The green body was printed and subsequently pyrolyzed to obtain the SiCN ceramic. We then managed to completely maintain the printed structure with uniform shrinkage being observed in all directions. The printed ceramic microstructures, denoting pyrolysis-induced microstructural changes, were characterized using scanning electron microscopy, X-ray diffraction, and transmission electron microscopy. This study paves the way for developing new approaches to obtain ultra-light and high-strength microwave-absorbing components that are suitable for aerospace applications by combining the SiCN ceramics of the unique dielectric properties with 3D printing technology to produce dense ceramics with periodic 3D structures.</p>
materials science, ceramics
What problem does this paper attempt to address?
The problems that this paper attempts to solve are: How to improve the polysilazane pre - ceramic polymer system by using carbon nanotubes (CNTs) as light absorbers through digital light processing (DLP) 3D printing technology, so as to achieve high - precision manufacturing of SiCN ceramics with complex structures. Specifically, this research aims to solve the following problems: 1. **Improve 3D printing accuracy**: In the traditional 3D printing process, due to light scattering and non - uniform illumination, it is difficult to precisely control the photocuring thickness, resulting in a decrease in printing accuracy. By introducing carbon nanotubes as light absorbers, the photocuring thickness can be effectively controlled and the printing accuracy can be improved. 2. **Improve the properties of ceramics after sintering**: Ceramic materials prepared by traditional methods are prone to cracks and pores during the sintering process, which affects their strength and reliability. In this study, by optimizing the pre - ceramic polymer system and combining DLP 3D printing technology, it is hoped to obtain SiCN ceramics with uniform shrinkage, no obvious deformation and high density after sintering. 3. **Explore the preparation method of new lightweight and high - strength microwave - absorbing components**: SiCN ceramics have excellent thermodynamic properties, stable physicochemical properties and unique dielectric properties, and are suitable for lightweight and high - strength microwave - absorbing components in the aerospace field. This study hopes to develop ultra - lightweight and high - strength microwave - absorbing components with a specific - function periodic 3D structure by combining the unique dielectric properties of SiCN ceramics with 3D printing technology. ### Key technical points - **Carbon nanotubes as light absorbers**: Carbon nanotubes can effectively absorb ultraviolet light, reduce light scattering, thereby precisely controlling the thickness of the photocuring layer and improving printing accuracy. - **Optimization of the polysilazane pre - ceramic polymer system**: By introducing acrylic monomers and photo - initiators, the polysilazane pre - ceramic polymer system is optimized, making it have a higher cross - linking density and activity during the photocuring process. - **Optimization of DLP 3D printing parameters**: Adjust parameters such as light intensity, exposure time and photocuring thickness to ensure that SiCN ceramics with complex structures can be successfully printed and maintain their shape. ### Experimental results The experimental results show that using carbon nanotubes as light absorbers significantly improves the accuracy of 3D printing, and at a sintering temperature of 1300 °C, SiCN ceramic samples with complex structures exhibit a lower porosity and a higher ceramic yield. In addition, the sintered ceramics exhibit a high flexural strength and modulus at 1400 °C. In conclusion, this research provides new ideas and technical means for the development of new ultra - lightweight and high - strength microwave - absorbing components, especially having broad application prospects in the aerospace field.