Abstract:The service life of cutting tools significantly affects machining costs. Establishing end-of-life criteria is crucial to mitigate wear effects on part quality, machine integrity, and maximize tool utilization. This is particularly important in machining operations with materials featuring numerous surface defects, as observed in those processed by prior thermal cutting operations, leading to accelerated tool wear rates. This study compares tool life and wear mechanisms in conventional and high-feed turning of low carbon manganese-alloyed steel bushes, previously profiled by plasma thermal cutting. Machinability tests utilized Class P carbide tools with triangular geometry for conventional turning and rhombic geometry for high-feed turning, both coated for enhanced performance. Tool's end-of-life criterion was established per ISO 3685 standard. The machining parameters adopted include a standard cutting depth of 1.5 mm, varying cutting speeds (140, 160, and 200 m/min) and feed rates (0.2; 0.3; 0.4 mm/rev for conventional turning, and 0.5; 0.75; 0.82 mm/rev for high-feed turning). Analysis involved assessing tool wear rates by observing flank wear and analyzing it using scanning electron microscopy and energy-dispersive spectroscopy techniques. Machined surface quality was quantified by roughness measurements. Metallographic characterization of bushes post-cutting indicated thermal cutting effects on the cutting edge's microstructure, microhardness, and residual stress. Machinability test results showed superior wear resistance in the high-feed turning tool (wear rate about 13 % lower). Surface finish evaluation demonstrated that, when isolating the effects of tool geometry and feed rate, the average surface roughness increased at a similar rate with tool wear for both conventional turning and high-feed turning. Identical wear mechanisms were observed: abrasive on the flank and adhesive on the rake face. Thus, the superiority of high-feed turning over conventional turning is established under the evaluated machining conditions.

PLATE-EDGE PREPARATION WITH MODERN FLAME-CUTTING TECHNIQUES

Development of Equipment and Technology for Precision Air-Plasma Cutting of Plate Steel

Research on Mechanized Plasma Gouging of Weldable Construction Steels

Bohren von ausferritischem Gusseisen mit Kugelgraphit*/Drilling of austempered ductile iron – Impact of the cutting edge geometry on tool wear and machining result

Investigation of Thermal Effects of Flame Straightening on High-Strength Steels

Role of Steel Plate Thickness on the Residual Stress Formation and Cracking Behavior During Flame Cutting

Experimental study of an oxygen plasma cutting torch: II. Arc–material interaction, energy transfer and anode attachment

Investigations of material hardness and structural changes in the heat-affected zone during plasma cutting

Preparation Methods for Lower Bainite after a Continuous Austempering Treatment of Thin Sheets of the Eutectoid Cold Work Steel 80CrV2 (1.2235)

A comparative study of the thermal and mechanical cutting influence on the cut-edge hardness of structural steels S355 and S1100

A review on the laser welding of coated 22MnB5 press-hardened steel and its impact on the production of tailor-welded blanks

Advanced coating architectures deposited by pulsed and filtered arc ion-plating

Edge preparation methods for cutting tools: a review

A Perspective on Arc Welding Research: The Importance of the Arc, Unresolved Questions and Future Directions

Comparison of laser beam, oxygen and plasma arc cutting methods in terms of their advantages and disadvantages in cutting structural steels

Cold pressure welding of aluminium-steel blanks: Manufacturing process and electrochemical surface preparation

Performance analysis of conventional and high-feed turning tools in machining the thermally affected zone after plasma arc cutting of low carbon manganese-alloyed steel

Exploring the cutting edge: Recent trends in cold metal transfer welding

Computational Techniques in Numerical Simulations of Arc and Laser Welding Processes

Experimental evaluation of tool wear throughout a continuous stroke blanking process of quenched 22MnB5 ultra-high-strength steel

Current Concepts for Cutting Metal-Based and Polymer-Based Composite Materials