Abstract:The family of 18% Ni maraging steels is known for its excellent combination of strength and toughness. The steels find applications in strategic industries, often in thick sections with welding of these sections coming into picture. These steels are welded in their softened, solution-annealed state, and the strength is then enhanced through post-weld heat treatment (PWHT). Welding in thick sections involves more number of passes, prolonged welding time and high heat input, leading to the weld joints of this steel not meeting the specified mechanical properties, importantly the fracture toughness (FT). Laser hybrid welding (LHW) is an advanced technique that combines the advantages of laser welding and arc welding and has been successfully applied to various materials and thicknesses. LHW provides benefits through decreased welding duration, reduced number of passes precisely regulated heat input, and reduced distortion when working with thick sections. The present study deals with the use of LHW of 12-mm-thick plates of maraging steel. It emerged that weld joints of required quality could be produced using LHW. Three different PWHTs were tried out—direct aging (PW-A), solutionizing + aging (PW-SA), and homogenization + solutionizing + aging (PW-HSA). In the fusion zone (FZ), the microstructure of the maraging steel under PW-A conditions exhibited a detrimental phase known as reverted austenite (RA) along the boundaries of the dendritic structure. However, the weldment subjected to the PW-SA and PW-HSA treatments did not show any presence of RA. Examination of the as-welded (AW) FZ through metallographic analysis revealed the segregation of nickel, molybdenum and titanium along the dendritic structure's boundaries, leading to RA formation after direct aging. Elemental segregation and austenite reversion were eliminated through the PW-SA and PW-HSA treatments. The application of PW-SA treatment to the welded joint resulted in a tensile strength of 1755 MPa and a FT of 93.7 MPa√m. This study thus brings out that LHW combined with PW-SA treatment can be adopted to produce acceptable weld quality in thick sections of maraging steel. The study also brings out that LHW leads to superior strength–toughness combination in thick sections of maraging steel.

A review on the laser welding of coated 22MnB5 press-hardened steel and its impact on the production of tailor-welded blanks

Laser welding of tailored blanks made of Al-Si-coated 22MnB5 steel using a filler wire and a variable energy distribution laser optics

Hardening Mechanism of Tailored Bland Laser Welding Different Thickness ULC-BH Steels

Influence of hot forming on microstructure and mechanical properties of laser tailor-welded dissimilar ultra-high-strength steels

Advanced High-Strength Steels for Automotive Applications: Arc and Laser Welding Process, Properties, and Challenges

Microstructure and mechanical properties of laser welded hot-press-formed steel with varying thicknesses of Al-Si coatings cleaned by nanosecond pulsed laser

Laser Hybrid Welding—An Advanced Joining Technique for Welding of Thick Plates of Maraging Steel

Effect of Boron Steel Coating on Microstructure and Property of Laser Tailor-Welded Blanks After Hot Stamping

Influence of Al–Si Coating on Microstructure and Mechanical Properties of Fiber Laser Welded and then Press-Hardened 22mnb5 Steel

Research on Car Galvanized Tailor-Welded Blanks of Fiber Laser Welding

Laser Shock Processing of Metal Sheet and Welded Joints

A Study on Laser Weldability and Formability of High Thickness Ratio Tailor Welded Blanks

Effects of Laser Premelting Treatment on Microstructure and Mechanical Properties of High-Strength Steel Weld Obtained by Laser-MAG Hybrid Welding

Significantly improved weldability in laser welding of additively manufactured Haynes 230 superalloys by tailoring microstructure

Microstructure and Mechanical Properties of an Ultra-High Strength Steel Fabricated by Laser Hybrid Additive Manufacturing

Optimization of laser beam spot welding (LBSW) parameters to maximize the load bearing capability of AHS-DP1000 steel lap joints

Mirostructure and Properties of Laser Welded Joints of Dual Phase and Press-Hardened Steels

Dissimilar Laser Welding of Austenitic Stainless Steel and Abrasion-Resistant Steel: Microstructural Evolution and Mechanical Properties Enhanced by Post-Weld Heat Treatment

Study on Laser Welded Heat-Affected Zone in New Ultralow Carbon Bainitic Steel

Recent Progress in Laser Powder Bed Fusions Processes of Advanced High-Strength Steels

Local laser softening of press-hardened steel at high feed rates