Abstract:The paper considers the influence of the parameters of the plasma spraying process on the technological characteristics of multilayer coatings based on nickel-chromium, nickel-chromium-aluminum-yttrium materials, oxide ceramics, intended for operation at high temperature and additional dynamic loads. The design of plasma coatings during their application (with subsequent high-energy processing) under such conditions requires a comprehensive solution – both the use of high-quality powder ingredients and the optimization of technological parameters. The plasma process of applying powder materials has been improved to obtain the maximum values of their utilization factors. The technological characteristics that affect the properties of plasma coatings are optimized, namely: the flow rates of the plasma-forming and materials-transporting gases, the flow rate of supplied powder materials, the current and voltage of the electric arc of the plasma torch, the distance from the plasma torch nozzle exit to the substrate. The paper presents the results of studies of the structure of coatings, performed using scanning electron microscopy. Their analysis has made it possible to form general regularities obtained by the action of radiation of compression plasma flows on coatings formed by air plasma. The considered structures are created using the processes of melting, compaction and high-speed cooling of plasma coatings. The main optimization indicators are the maximum local compaction and spillage of the obtained compositions with the absence of defects and destruction from the impact of compression plasma flows. The main effect during the action of radiation of a compression plasma flow on previously formed coatings is thermal. It contributes heating of the near-surface layer. When the coating is exposed to radiation of compression plasma flows, a remelted layer of oxides with a thickness of about 12–15 μm is created, smoothing the relief of the formed surface and creating a network of cracks on the surface, diverging into the depth of the coating. The liquid-phase processes occurring in the molten phase of the near-surface layers after exposure to compression plasma radiation change the structure of the layers and contribute to the modification of their mechanical properties. By smoothing the surface, increasing the density of the surface crystallized layer and minimizing macro-defects – pores or macrocracks – the mechanical characteristics of the coatings increase.

Advanced coating architectures deposited by pulsed and filtered arc ion-plating

Two-Layer Nanocomposite TiC-Based Coatings Produced by a Combination of Pulsed Cathodic Arc Evaporation and Vacuum Electro-Spark Alloying

Application of Magnetron Sputter Ion Plated CrAlTiN Composite Coating in Improving Wear Resistance of Milling Cutter

Structure of the Coatings Onto Ceramic Cutting Tools Deposited by Pulsed High Energy Density Plasma

Physical Vapor Deposition Technology for Coated Cutting Tools: A Review

Hard material powders and hard alloy powders for plasma surface coating

Study and Development of a Multilayered Coating to Improve Hard Metal Cutting Tools Performances

Microstructure and Properties of the AlCrSi(O)N Tool Coatings by Arc Ion Plating

HARD AND WEAR-RESISTANT TITANIUM NITRIDE COATINGS DEPOSITED BY PULSED HIGH ENERGY DENSITY PLASMA FOR CUTTING TOOLS

Plasma Nitrided and TiCN Coated AISI H13 Steel by Pulsed Dc PECVD and Its Application for Hot-Working Dies

Multi-Layers Composite Plasma Coatings Based on Oxide Ceramics and M-Croll

Progress of Surface Modification for Ceramic Cutting Tools by Pulsed High Energy Density Plasma

Chemical composition, structure and microhardness of multilayer high-temperature coatings

Industrial application potential of high power impulse magnetron sputtering for wear and corrosion protection coatings

New Process for Improving Silicon Nitride Cutting Tools: Coating by Pulsed High Energy Density Plasma

Discharge Characterization and Technological Application of an Arc Ion Plating with a Hollow Cathode Vacuum Arc

Multi-layer Ti-based Coating Obtained by Arc PVD Method

Recent developments in the new generation of hard coatings applied on cemented carbide cutting tools

Ti(C,N) Hard Coatings Prepared by Pulsed High Energy Density Plasma

Improved Adhesion and Tribological Properties of AlTiN-TiSiN Coatings Deposited by DCMS and HiPIMS on Nitrided Tool Steels

Multi-Scale-Structured Composite Coatings by Plasma-Transferred Arc for Nuclear Applications