Abstract:Nonlinear micro-electro-mechanical systems (MEMS) resonators open new opportunities in sensing and signal manipulation compared to their linear counterparts by enabling frequency tuning and increased bandwidth. Here, we design, fabricate and study drumhead resonators exhibiting strongly nonlinear dynamics and develop a reduced order model (ROM) to capture their response accurately. The resonators undergo electrostatically-mediated thermoelastic buckling which tunes their natural frequency from 4.7 to 11.3 MHz, a factor of 2.4x tunability. Moreover, the imposed buckling switches the nonlinearity of the resonators between purely stiffening, purely softening, and even softening-to-stiffening. Accessing these exotic dynamics requires precise control of the temperature and the DC electrostatic forces near the resonator's critical-buckling point. To explain the observed tunability, we develop a one-dimensional physics-based ROM that predicts the linear and nonlinear response of the fundamental bending mode of these drumhead resonators. The ROM captures the dynamic effects of the internal stresses resulting from three sources: The residual stresses from the fabrication process, the mismatch in thermal expansion between the constituent layers, and lastly, the applied electrostatic forces. The ROM replicates the observed tunability of linear (within 5.5% error) and nonlinear responses even near the states of critical buckling. These remarkable nonlinear and large tunability of the natural frequency are valuable features for on-chip acoustic devices in broad applications such as signal manipulation, filtering, and MEMS waveguides.

Thermal tuning of mechanical nonlinearity in GaAs doubly-clamped MEMS beam resonators

Mechanical Control of Nonlinearity in Doubly Clamped MEMS Beam Resonators Using Preloaded Lattice-Mismatch Strain

Significant tuning of internal mode coupling in doubly clamped MEMS beam resonators by thermal effect

Giant Enhancement in the Thermal Responsivity of Microelectromechanical Resonators by Internal Mode Coupling

1:1 Internal Mode Coupling Strength In Gaas Doubly-Clamped Mems Beam Resonators With Linear And Nonlinear Oscillations

Mechanical Nonlinearity Elimination with a Micromechanical Clamped-Free Semicircular Beams Resonator

Nonlinearity Reduction in MEMS Resonators Based on Design of H-shaped Beams

Enhanced thermal sensitivity of MEMS bolometers integrated with two-dimensional phononic crystals

Improving the Dynamic Range and Resolution of Mems Resonant Sensors Utilizing Nonlinear Cancellation

Ultra-tuning of nonlinear drumhead MEMS resonators by electro-thermoelastic buckling

Tuning the nonlinearity of graphene mechanical resonators by Joule heating

Self-Temperature-Compensated GaN MEMS Resonators Through Strain Engineering Up to 600 K

On Enhancing the Sensitivity of Resonant Thermometers Based on Parametric Modulation

Actuation Dependency of Frequency Tuning in MEMS Resonators

Dependence of Frequency-Temperature Stability on Support Tethers in Dual-Beam Piezoresistive Sensing MEMS Resonators

Tunable MEMS cantilever resonators electrothermally actuated and piezoelectrically sensed

Quasi-linear Frequency Tuning for CMOS-MEMS Resonators

Enhanced linearity through high-order antisymmetric vibration for MEMS DC power sensor

Strong coherent energy exchange induced by the bending-bending mode-coupling effect in doubly clamped MEMS beam resonators

Highly Sensitive Temperature Sensor Based on Coupled-Beam MN-on-Si MEMS Resonators Operating in Out-of-Plane Flexural Vibration Modes

On Extending Signal-to-Noise Ratio of Resonators for a MEMS Resonant Accelerometers Using Nonlinearity Compensation