Abstract:For recent lithium-ion batteries (LIBs), there have been lots of researches about convert liquid-phase electrolyte to solid-state electrolyte (i. e. all-solid-state battery) to improve safety and stability. Solid-state electrolyte materials have to satisfy some criteria including high ionic conductivity at room-temperature, chemical stability against reducing environment, and mechanical strength. Many solid-materials for electrolyte have been researched, including perovskite, garnet, and sulfide-type of materials. Among them, garnet-type based lithium lanthanum zirconium oxide (LLZO, Li 7 La 3 Zr 2 O 12 ) has been received attention due to its high ionic conductivity (~10 -4 S/cm at room temperature) and wide electrochemical stability window (~6 V versus Li/Li + ). The main issue of LLZO is the high interfacial resistance with anode and cathode materials such as Li metal and LiCoO 2 . Many researchers have tried to understand the cause of this interfacial resistance for LLZO. K. Park et al. researched about the cathode/electrolyte (LLZO) interface and revealed co-diffusion and second-phase formation of LLZO at high-temperature [1]. M. Zarabian et al. reported that spin-coated LLZO on the LiCoO 2 pellet fabricated at low-temperature (~400 o C) and co-diffusion of La and Co at the interface by using X-ray photoelectron spectroscopy (XPS) [2]. They commonly suggested that elevated temperature make chemical interaction and this make high interfacial resistance. In this study, we adopted novel sintering method, flash light annealing (FLA) process, to fabricate LLZO solid-electrolyte. This method is also called rapid, cool sintering because of its unique characteristics compared to conventional sintering methods [3]. FLA uses instantaneous high current to generate intensive pulsed light (IPL), and irradiate IPL toward the specimen to sinter the materials. Unlike the conventional sintering methods, this novel method has lots of advantages including availability of treatment at STP and fast sintering time (~ a few ms). Rapid sintering process gives no time for the diffusion at the interface, thus the interfacial resistance between cathode and LLZO solid-electrolyte must be reduced. We fabricated LLZO solid-electrolyte on the commercial LiCoO 2 pellet by using solution-based spin-coating method and sintered the film by using FLA method. XPS and energy-dispersive X-ray spectroscopy (EDX) analysis were conducted to observe interface and diffusion of La and Co elements. Also, X-ray diffraction (XRD) method was used to investigate sintering ability of FLA through crystallinity development. The interfacial resistance between LiCoO 2 and LLZO solid-electrolyte was analyzed by electrochemical impedance spectroscopy (EIS) through cross-plane set-up.

Rapid thermal processing of garnet-based composite cathodes

Facile Surface Modification Method to Achieve an Ultralow Interfacial Resistance in Garnet-Based Li Metal Batteries

(Invited) Achieving High Areal Capacity and Extreme Critical Current Densities through Tailored Garnet Solid Electrolyte Structures

Enabling metal substrates for garnet-based composite cathodes by laser sintering

Optimization of Catholyte in Composite Cathodes for Garnet-Structured Llzo Electrolyte in Solid-State Batteries

Rapid Li compensation toward highly conductive solid state electrolyte film

Rapid Processing of Uniform, Thin, Robust, and Large‐Area Garnet Solid Electrolyte by Atmospheric Plasma Spraying (adv. Energy Mater. 30/2023)

Enabling High-Performance Hybrid Solid-State Batteries by Improving the Microstructure of Free-Standing LATP/LFP Composite Cathodes

Liquid sintering of garnet electrolytes by lithium germanate: Properties and interfacial performance with lithium anode

Low-Sintering-Temperature Garnet Oxides by Conformal Sintering-Aid Coating

Rapid synthesis of garnet-type Li7La3Zr2O12 solid electrolyte with superior electrochemical performance

The Riddle of Dark LLZO: Cobalt Diffusion in Garnet Separators of Solid‐State Lithium Batteries

Cathode-electrolyte material interactions during manufacturing of inorganic solid-state lithium batteries

Boosting the electrochemical performance of Li-garnet based all-solid-state batteries with Li4Ti5O12 electrode: Routes to cheap and large scale ceramic processing

A Sintering‐Free Cathode for Garnet‐Based All‐Solid‐State Li Metal Batteries

Direct Precursor Route for the Fabrication of LLZO Composite Cathodes for Solid‐State Batteries

A Study on Cathode Interface of Li-La-Zr-O Solid-State Electrolyte Fabricated Via Rapid Sintering Process

Lithium dendrites suppressed by low temperature in-situ anti-perovskite coated garnet solid-state electrolyte

Co-Sintering of Li1.3Al0.3Ti1.7(PO4)3 and LiFePO4 in Tape-Casted Composite Cathodes for Oxide Solid-State Batteries

Surfactant Induced Crystal Regulation and Dual Layer Carbon Coating Formation for Enhanced Performance of High Voltage Olivine-Type Lithium Cobalt Phosphate Cathode Materials

A new nanostructured γ-Li3PO4/GeO2 composite for all-solid-state Li-ion battery applications