Abstract:Densified LLZTO electrolytes are synthesized using Li2O and Li2ZrO3 precursors via a 60‐second Joule heat‐assisted process. A Sn‐SnF2 coating, produced by melt‐quenching, forms a Li‐Sn alloy and LiF interlayer in situ, achieving near‐zero interfacial resistance and a critical current density of 23 mA cm–2. Solid‐state batteries with modified LLZTO and NMC811 cathodes retain 88.63% capacity after 3000 cycles. Garnet‐type Li6.5La3Zr1.5Ta0.5O12 (LLZTO) solid electrolytes provide the necessary electrochemical stability and ionic conductivity for solid‐state lithium‐metal batteries (SSLMBs). However, their wider application is hindered by their high interfacial resistance with electrodes and a lengthy synthesis process. This study presents the synthesis of densified LLZTO electrolytes using unconventional Li2O and Li2ZrO3 precursors through an ultrafast (≈60 s) Joule heat‐assisted synthesis approach in a single‐step process. The lower sintering temperature of Li2ZrO3 compared to traditional ZrO2 precursor yields LLZTO with larger grains, resulting in enhanced Li+ conductivity (7.0 × 10−4 S cm−1 at 25 °C), reduced electronic conductivity (1.7 × 10−10 S cm−1), and higher density (94.2%). Applying a 52–80 nm Sn:SnF2 coating on the LLZTO surface using a melt‐quenching approach produces a uniform interlayer that chemically converts to Li‐Sn alloy and LiF upon contact with lithium, resulting in a near‐zero interfacial resistance and a critical current density of 4.2 mA cm−2 at 25 °C. The SSLMBs, incorporating Sn:SnF2‐coated LLZTO electrolyte with NMC811 cathode, demonstrate remarkable initial capacity (181.1 mAh g−1) and cycle performance (88.63% capacity retention at 3000th cycle). The results indicate that this approach has the potential to advance the commercial fabrication technology for high‐performance solid electrolytes for SSLMBs.

Rapid synthesis of garnet-type Li7La3Zr2O12 solid electrolyte with superior electrochemical performance

Facile Surface Modification Method to Achieve an Ultralow Interfacial Resistance in Garnet-Based Li Metal Batteries

Ultrafast One‐Step Synthesis of Garnet‐Type Solid Electrolytes With Modified Surface and Microstructure for Solid‐State Lithium‐Metal Batteries

Preparation and electrochemical properties of Li6La3Zr0.7Ti0.3Ta0.5Sb0.5O12 high-entropy Li-garnet solid electrolyte

Enhanced densification and ionic conductivity of Li-garnet electrolyte: Efficient Li2CO3 elimination and fast grain-boundary transport construction

Highly Conductive Garnet-Type Electrolytes: Access to Li6.5La3Zr1.5Ta0.5O12 Prepared by Molten Salt and Solid-State Methods

Uniform Densification of Garnet Electrolyte for Solid‐State Lithium Batteries

Unveiling the roles of alumina as a sintering aid in Li‐Garnet solid electrolyte

Sintering Behavior of Garnet‐type Li6.4La3Zr1.4Ta0.6O12 in Li2CO3 Atmosphere and Its Electrochemical Property

Low-Temperature Sintering of a Garnet-Type Li6.5La3Zr1.5Ta0.5O12 Solid Electrolyte and an All-Solid-State Lithium-Ion Battery.

Low-Sintering-Temperature Garnet Oxides by Conformal Sintering-Aid Coating

Enhanced Performance of Li6.4La3Zr1.4Ta0.6O12 Solid Electrolyte by the Regulation of Grain and Grain Boundary Phases.

Li7La3Zr2O12 solid electrolyte sintered by the ultrafast high-temperature method

Developing Preparation Craft Platform for Solid Electrolytes Containing Volatile Components: Experimental Study of Competition between Lithium Loss and Densification in Li7La3Zr2O12

Effect of Lithium Content and Sintering Time on Conductivity of Li7La3Zr2O12 as Solid Electrolyte

Preparation and performances of gallium-doped LLZO electrolyte with high ionic conductivity by rapid ultra-high-temperature sintering

Garnet solid-state electrolyte: A new single-step elaboration by electric arc-melting

Rapid Li compensation toward highly conductive solid state electrolyte film

A rational design of garnet-type Li7La3Zr2O12 with ultrahigh moisture stability

Enhancement of Density and Ionic Conductivity for Garnet-Type Li5La3Ta2O12 Solid Electrolyte by Self-Consolidation Strategy