Abstract:Densified LLZTO electrolytes are synthesized using Li2O and Li2ZrO3 precursors via a 60‐second Joule heat‐assisted process. A Sn‐SnF2 coating, produced by melt‐quenching, forms a Li‐Sn alloy and LiF interlayer in situ, achieving near‐zero interfacial resistance and a critical current density of 23 mA cm–2. Solid‐state batteries with modified LLZTO and NMC811 cathodes retain 88.63% capacity after 3000 cycles. Garnet‐type Li6.5La3Zr1.5Ta0.5O12 (LLZTO) solid electrolytes provide the necessary electrochemical stability and ionic conductivity for solid‐state lithium‐metal batteries (SSLMBs). However, their wider application is hindered by their high interfacial resistance with electrodes and a lengthy synthesis process. This study presents the synthesis of densified LLZTO electrolytes using unconventional Li2O and Li2ZrO3 precursors through an ultrafast (≈60 s) Joule heat‐assisted synthesis approach in a single‐step process. The lower sintering temperature of Li2ZrO3 compared to traditional ZrO2 precursor yields LLZTO with larger grains, resulting in enhanced Li+ conductivity (7.0 × 10−4 S cm−1 at 25 °C), reduced electronic conductivity (1.7 × 10−10 S cm−1), and higher density (94.2%). Applying a 52–80 nm Sn:SnF2 coating on the LLZTO surface using a melt‐quenching approach produces a uniform interlayer that chemically converts to Li‐Sn alloy and LiF upon contact with lithium, resulting in a near‐zero interfacial resistance and a critical current density of 4.2 mA cm−2 at 25 °C. The SSLMBs, incorporating Sn:SnF2‐coated LLZTO electrolyte with NMC811 cathode, demonstrate remarkable initial capacity (181.1 mAh g−1) and cycle performance (88.63% capacity retention at 3000th cycle). The results indicate that this approach has the potential to advance the commercial fabrication technology for high‐performance solid electrolytes for SSLMBs.

Low-Sintering-Temperature Garnet Oxides by Conformal Sintering-Aid Coating

Facile Surface Modification Method to Achieve an Ultralow Interfacial Resistance in Garnet-Based Li Metal Batteries

(Invited) Achieving High Areal Capacity and Extreme Critical Current Densities through Tailored Garnet Solid Electrolyte Structures

Low-Temperature Sintering of a Garnet-Type Li6.5La3Zr1.5Ta0.5O12 Solid Electrolyte and an All-Solid-State Lithium-Ion Battery.

Sintering Behavior of Garnet‐type Li6.4La3Zr1.4Ta0.6O12 in Li2CO3 Atmosphere and Its Electrochemical Property

Uniform Densification of Garnet Electrolyte for Solid‐State Lithium Batteries

Unveiling the roles of alumina as a sintering aid in Li‐Garnet solid electrolyte

Garnet Electrolyte with an Ultralow Interfacial Resistance for Li-Metal Batteries

Rapid synthesis of garnet-type Li7La3Zr2O12 solid electrolyte with superior electrochemical performance

Enhanced densification and ionic conductivity of Li-garnet electrolyte: Efficient Li2CO3 elimination and fast grain-boundary transport construction

Liquid sintering of garnet electrolytes by lithium germanate: Properties and interfacial performance with lithium anode

Lithium dendrites suppressed by low temperature in-situ anti-perovskite coated garnet solid-state electrolyte

A Sintering‐Free Cathode for Garnet‐Based All‐Solid‐State Li Metal Batteries

Enhanced Performance of Li6.4La3Zr1.4Ta0.6O12 Solid Electrolyte by the Regulation of Grain and Grain Boundary Phases.

Amorphous Dual‐Layer Coating: Enabling High Li‐Ion Conductivity of Non‐Sintered Garnet‐Type Solid Electrolyte

Ultrafast One‐Step Synthesis of Garnet‐Type Solid Electrolytes With Modified Surface and Microstructure for Solid‐State Lithium‐Metal Batteries

On the Interfacial Properties of the Garnet-Type Electrolyte Ceramic Pellets of Cubic Li6.4la3zr1.4ta0.6o12: A Comprehensive Promotion Mechanism by the Sintering Additive of Li-Ion Conducting Licl

Optimizing Li Ion Transport in a Garnet-Type Solid Electrolyte via a Grain Boundary Design

Liquid phase penetration sintering of garnet-type solid electrolyte LLZTO

Room-temperature fabrication of garnet-type solid-electrolyte: Optimizing particle size for high ionic conductivity

Solvent-Free and Long-Cycling Garnet-Based Lithium-Metal Batteries