Abstract:For recent lithium-ion batteries (LIBs), there have been lots of researches about convert liquid-phase electrolyte to solid-state electrolyte (i. e. all-solid-state battery) to improve safety and stability. Solid-state electrolyte materials have to satisfy some criteria including high ionic conductivity at room-temperature, chemical stability against reducing environment, and mechanical strength. Many solid-materials for electrolyte have been researched, including perovskite, garnet, and sulfide-type of materials. Among them, garnet-type based lithium lanthanum zirconium oxide (LLZO, Li 7 La 3 Zr 2 O 12 ) has been received attention due to its high ionic conductivity (~10 -4 S/cm at room temperature) and wide electrochemical stability window (~6 V versus Li/Li + ). The main issue of LLZO is the high interfacial resistance with anode and cathode materials such as Li metal and LiCoO 2 . Many researchers have tried to understand the cause of this interfacial resistance for LLZO. K. Park et al. researched about the cathode/electrolyte (LLZO) interface and revealed co-diffusion and second-phase formation of LLZO at high-temperature [1]. M. Zarabian et al. reported that spin-coated LLZO on the LiCoO 2 pellet fabricated at low-temperature (~400 o C) and co-diffusion of La and Co at the interface by using X-ray photoelectron spectroscopy (XPS) [2]. They commonly suggested that elevated temperature make chemical interaction and this make high interfacial resistance. In this study, we adopted novel sintering method, flash light annealing (FLA) process, to fabricate LLZO solid-electrolyte. This method is also called rapid, cool sintering because of its unique characteristics compared to conventional sintering methods [3]. FLA uses instantaneous high current to generate intensive pulsed light (IPL), and irradiate IPL toward the specimen to sinter the materials. Unlike the conventional sintering methods, this novel method has lots of advantages including availability of treatment at STP and fast sintering time (~ a few ms). Rapid sintering process gives no time for the diffusion at the interface, thus the interfacial resistance between cathode and LLZO solid-electrolyte must be reduced. We fabricated LLZO solid-electrolyte on the commercial LiCoO 2 pellet by using solution-based spin-coating method and sintered the film by using FLA method. XPS and energy-dispersive X-ray spectroscopy (EDX) analysis were conducted to observe interface and diffusion of La and Co elements. Also, X-ray diffraction (XRD) method was used to investigate sintering ability of FLA through crystallinity development. The interfacial resistance between LiCoO 2 and LLZO solid-electrolyte was analyzed by electrochemical impedance spectroscopy (EIS) through cross-plane set-up.

The Riddle of Dark LLZO: Cobalt Diffusion in Garnet Separators of Solid‐State Lithium Batteries

The Riddle of Dark LLZO: Cobalt Diffusion in Garnet Separators of Solid‐State Lithium Batteries (Adv. Funct. Mater. 43/2023)

A Study Of Suppressed Formation Of Low-Conductivity Phases In Doped Li7la3zr2o12 Garnets By In Situ Neutron Diffraction

Inhibiting Formation and Reduction of Li2 CO3 to LiCx at Grain Boundaries in Garnet Electrolytes to Prevent Li Penetration.

Inhibiting Formation and Reduction of Li2CO3 to LiCx at Grain Boundaries in Garnet Electrolytes to Prevent Li Penetration

Accelerating the Development of LLZO in Solid‐State Batteries Toward Commercialization: A Comprehensive Review

Atomic-Scale Engineering of Grain Boundary Chemistry and Potential for Li-Garnet Solid-State Electrolytes

In‐Situ Construction of Electronically Insulating and Air‐Stable Ionic Conductor Layer on Electrolyte Surface and Grain Boundary to Enable High‐Performance Garnet‐Type Solid‐State Batteries

Garnet-type Solid-state Electrolyte Li7La3Zr2O12: Crystal Structure, Element Doping and Interface Strategies for Solid-state Lithium Batteries

Elucidating the Role of Multi-Scale Microstructures in Li7La3Zr2O12 Based All-Solid-state Lithium Batteries

All‐Solid‐State Garnet‐Based Lithium Batteries at Work–In Operando TEM Investigations of Delithiation/Lithiation Process and Capacity Degradation Mechanism

Revealing the Short‐Circuiting Mechanism of Garnet‐Based Solid‐State Electrolyte

Interphase Engineering Enabled All-Ceramic Lithium Battery

Amorphous Phase Induced Lithium Dendrite Suppression in Glass-Ceramic Garnet-Type Solid Electrolytes

Garnet Li7La3Zr2O12-Based Solid-State Lithium Batteries Achieved by In Situ Thermally Polymerized Gel Polymer Electrolyte

A Study on Cathode Interface of Li-La-Zr-O Solid-State Electrolyte Fabricated Via Rapid Sintering Process

Li 2 CO 3 : Insights into Its Blocking Effect on Li-Ion Transfer in Garnet Composite Electrolytes

Compositional and Structural Control in LLZO Solid Electrolytes

Ta-LLZO Garnet Processed By Spark Plasma Sintering for All Solid State Batteries

Optimizing Li Ion Transport in a Garnet-Type Solid Electrolyte via a Grain Boundary Design

Particle Morphology and Lithium Segregation to Surfaces of the Li$_7$La$_3$Zr$_2$O$_{12}$ Solid Electrolyte