Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. Aluminium matrix composites significantly benefit the manufacturing sector due to the high strength-to-weight ratio. However, grain refinement was one of the major problems faced by the research community and also as-cast AA6063 contained eutectic silicon with sharp, long elongated laths that consequently reduces strength and limit their applications. So, the prime novelty of this research work is to refine the grains by performing the cold rolling operation in AA6063 and incorporating rice husk ash and coal fly ash in the AA6063 matrix to break those eutectic laths which attributes to the enhancement of the mechanical properties. Rice husk ash and coal fly ash were chosen because they are economical, possess low density and are available in enormous quantities as solid waste by-products. They contain a substantial concentration of SiO2 and serve as a viable reinforcement for improving the mechanical properties of aluminium composites. In this research, the grain characteristics along with the mechanical properties of aluminium composites reinforced with rice husk ash and coal fly ash, produced by the stir casting technique were investigated. The reinforcements were added in varying concentrations (1.5 and 3.0 wt.%). Six specimens were fabricated of which five were cold rolled. Image J and Origin software was used in evaluating the average grain size of the fabricated alloys and their composites. The results were discussed with the help of grain size distribution and profile plots. Structural and composition studies were done using scanning electron microscopy, energy-dispersive X-ray spectroscopy and X-ray diffraction spectroscopy. Hardness and tensile tests were performed on the fabricated composites. The outcome of this research reveals, AA6063-3 wt.% rice husk ash composite has improved hardness (84HV) and tensile strength (156 MPa). Moreover, the average grain size of 10.52 μm was the main reason for the attainment of enhanced mechanical properties.

Physicomechanical, Wettability, Corrosion, Thermal, and Microstructural Morphology Characteristics of Carbonized and Uncarbonized Bagasse Ash Waste-Reinforced Al-0.45Mg-0.35Fe-0.25Si-Based Composites: Fabrications and Characterizations

Development of Aluminum-Based Composite Material by using Bagasse Ash and Eggshell as Reinforcement Along with Nano-CuO Particles

Exploring tribological properties in the design and manufacturing of metal matrix composites: an investigation into the AL6061-SiC-fly ASH alloy fabricated via stir casting process

Influence of particulate B4C with high weight fraction on microstructure and mechanical behavior of an Al-based metal matrix composite

Microstructural, physical and mechanical characterization of grinding sludge based aluminium metal matrix composite

Investigating the tribological behavior of bioinspired surfaces in agro-waste and alumina reinforced AA6063 matrix composites

Experimental investigation of material properties of Al-Sic-fly ash composite

Development and wear behavior investigation on aluminum-7075/B4C/fly ash metal matrix composites

Physical, Mechanical, and Tribological Properties of Industrial Waste Fly Ash Reinforced AA5083 Composites Fabricated by Stir Casting Process

Mechanical and Micro-Structural Behavior of Lignite Coal Based Fly-Ash and Microsphere Reinforced Al 6061 Metal Matrix Composite

Mechanical Behaviour and Fractured Surface Analysis of Bauxite Residue and Graphite Reinforced Aluminium Hybrid Composites

The utilization of agricultural and industrial waste in the synthesis of AA7075-based novel lightweight composite

Enhanced mechanical behaviour and grain characteristics of aluminium matrix composites by cold rolling and reinforcement addition (Rice husk ash and Coal fly ash)

Enhancement of Wettability of Aluminum Based Silicon Carbide Reinforced Particulate Metal Matrix Composite

Mechanical and Wear Behaviour of Nano-Fly Ash Particle-Reinforced Mg Metal Matrix Composites Fabricated by Stir Casting Technique

Synthesis and characterization of spent alumina catalyst and grinding sludge reinforced aluminium-based composite material

Evaluation of Mechanical and Thermal Properties of Aluminium-7475 Reinforced with Graphite and Fly ash

The utilisation of coconut shell ash in production of hybrid composite: Microstructural characterisation and performance analysis

Investigation on Mechanical Properties of Agro and Industrial Waste Reinforcement in Aluminium 7075 Composite with Liquid Metal Stir Casting Route

Investigation on Mechanical Behavior of Al6061- Coconut Shell Ash- Granite Dust Reinforced Hybrid Metal Matrix Composites Manufactured using Stir Casting Technique

A Novel Approach in Developing Aluminum Hybrid Green Metal Matrix Composite Material Using Waste Eggshells, Cow Dung Ash, Snail Shell Ash and Boron Carbide as Reinforcements