Microstructure and strengthening mechanisms of tantalum prepared using laser melting deposition
Baosheng Guan,Minggang Xu,Xiaoshan Yang,Yuzhao Zhou,Chun Li,Yaqi Ji,Xue Liu,Jinfeng Li,Dou Wang,Jingang Tang,Guomin Le
DOI: https://doi.org/10.1016/j.ijrmhm.2021.105773
IF: 4.804
2022-02-01
International Journal of Refractory Metals and Hard Materials
Abstract:Laser melting deposition (LMD) additive manufacturing process has been attractive to the fabrications of pure tantalum due to the advantage of fast near net shaping of complex shaped components. In the present study, the LMD process has been applied to the fabrication of tantalum using two kinds of powders with different interstitial contents. The microstructure, chemistry, and mechanical properties of the LMD samples have been investigated to understand the strengthening mechanisms. The results show that the tantalum samples have near full dense, and large columnar grains with the growth direction slightly deviated from the deposition direction. The LMD tantalum can have high hardness of up to 300 HV, mainly due to the solid solution strengthening of nitrogen and oxygen interstitials. With relative low interstitial contents of about 400 ppm, the LMD tantalum can have ductile properties, showing ultimate tensile strength above 400 MPa, and elongations of about 14–16%, which are comparable to the properties of cold-worked tantalum. The present work suggests the LMD tantalum could have potential usages in the industry fields.
materials science, multidisciplinary,metallurgy & metallurgical engineering