Abstract:In this study, the thermo-hydraulic performance of non-uniform electrohydrodynamic (EHD) conduction pumping in rectangular and straight microchannels was experimentally investigated. Electrodes are arranged in two ways: dimensions constant, spacing varies (Cases 1–3); both dimensions and spacing vary (Cases 4–6). The results show that EHD conduction pumping significantly enhances heat transfer performance, increasing the average Nusselt number (Nu) by 17.9 %-87 % compared to a smooth microchannel. As Re increases, the inertial force of the fluid dominates, diminishing EHD-induced vortices and limiting heat transfer enhancement. EHD conduction pumping enhances heat transfer by creating vortices that mimic solid pseudo-roughness microelements, increasing fluid disturbance and mixing near the wall. However, these vortices also impede the flow, resulting in a trade-off with increased pressure drop resistance. This paper innovatively adopts an arrangement of increasing electrode size (non-uniform), which effectively reduces the pressure drop resistance in the microchannel while maintaining the advantage of enhanced heat transfer. Cases 4, 5, and 6 exhibit significantly higher comprehensive heat transfer performance (η) than Case 0 (without electrodes), especially at low Re. While the inertial force at high Re suppresses vortex formation and heat transfer enhancement, η remains superior to Case 0. Notably, Case 5 maintains a minimum η of 1.18 even at Re = 1000. Furthermore, this paper proposes an equivalent slip drag reduction mechanism to elucidate the drag reduction effect of the increasing electrode size arrangement. Heat transfer augmentation and pressure drop reduction, as mentioned here in microchannels, are crucial for electronics cooling and microfluidic devices.

A Two-Stage EHD Gas Pump in a Square Channel With Electrodes Mounted on Two Opposite Facing Walls

EHD gas pump as a cooling device for electronic components in a horizontal channel

On Electronics Cooling Using an Electrohydrodynamic Gas Pump with Aligned Electrodes

Highly Efficient Electrohydrodynamic Pumping: Molecular Isomer Effect of Dielectric Liquids, and Surface States of Electrodes

Heat transfer enhancement and flow resistance reduction characteristics of non-uniform electrohydrodynamic conduction pumping in microchannels

Effects of Inclined Cylinder Ports on Gaseous Cavitation of High-Speed Electro-Hydrostatic Actuator Pumps: a Numerical Study

Heat transfer enhancement by electrohydrodynamics in wavy channels

High Force Density Multi-Stage Electrohydrodynamic Jets Using Folded Laser Microfabricated Electrodes

Electrofluid Dynamic (EFD) Energy Conversion in Gas Flows with Suspended Nanoparticles

Thermal and fluid aspects of dual piezoelectric jet pump of double chambers

Effect of Surface Texture on Wear Reduction of the Tilting Cylinder and the Valve Plate for a High-Speed Electro-Hydrostatic Actuator Pump

Load-Sensing Pump Design To Reduce Heat Generation Of Electro-Hydrostatic Actuator Systems

Three-dimensional Simulation of Alkaline Electrolyzer with an Advanced Partitioned Point Flow Channel

Low-power microfluidic electro-hydraulic pump (EHP)

Numerical Comparative Investigating of PEMFC with Novel Hybrid Zigzag Channels: Reaction, Transport and Drainage Enhancements

Effects of 3D electrodes arrangement in a novel AC electroosmotic micropump: Numerical modeling and experimental validation

Characterization of Wicking Performance for Open Rectangular Microgrooves under Planar EHD Effects in Two-Phase Heat Transfer Devices

Experimental and Numerical Investigation of Corona Discharge Induced Flow on a Flat Plate

On controlling the flow behavior driven by induction electrohydrodynamics in microfluidic channels

Advancing electrochemical drilling process via coupling of flow field and electric field in pulsating state generated by a novel tube tool

Simulation Analysis of Charge and Flow Features in a Needle-to-Ring Electrohydrodynamic Actuator