Abstract:The electron microprobe (EMP) analysis is a quick and non-destructive method for qualitative and quantitative analyses upon samples from material science and geoscience, which plays a fundamental and vital role in these subjects. It is of great scientific significance in the geological research to use EMP to determine the in-situ contents of Fe with different valences (ferric and ferrous) in minerals. The newly developed microprobe-based Flank Method measurement to quantify the Fe3+ content in minerals is comparatively of much higher precision and greater credibility than the early experimental approaches. The Flank Method measures the defined flank positions instead of the actual peaks of the iron's X-ray characteristic L emission spectra (FeL); those flank positions correspond to the maxima (FeL alpha*) and minima (FeL beta*) values of the iron's absorption difference spectrum. Meanwhile, a spectrometer calibration procedure is designed for the peak shift error correction prior to the Flank Method measurement in order to maintain the analytical reliability and reproducibility. This calibration procedure should be performed in each working session within a proper time duration. In this work, we propose a modified and improved Flank Method measuring procedure after the early suggestions, to analyze the Fe3+ content in the garnet by using JEOL JXA-8100 microprobe in our facility. The feasibility, reliability and repeatability of this method has been well tested on several standard garnets with known Fe3+ contents in our laboratory, and then it is applied on some natural garnet samples. The analyzed garnets are from the typical oceanic subduction type medium-low temperature and (ultra-)high-pressure eclogites of SW Tianshan (Habutengsu), Lhasa terrane (Songduo area) and North Qilian (Baijingsi foliate zone). The results show that the Fe3+ content serves a good indicator of the oxidation state, and its (zonal) change in garnet corresponds to the metamorphic P-T path, suggesting that the oxygen-fugacity is probably prone to decline in the subduction process.

Novel and rapid NH 4 HF 2 assisted KH 2 PO 4 fusion of pegmatite ores bearing refractory minerals for multi-element determination by atomic spectrometry

Flux-free fusion technique using a boron nitride vessel and rapid acid digestion for determination of trace elements by ICP-MS

Rapid Determination of Trace Element Compositions in Peridotites by LA‐ICP‐MS Using an Albite Fusion Method

A Flux‐Free Fusion Technique for Rapid Determination of Major and Trace Elements in Silicate Rocks by LA‐ICP‐MS

A rapid dissolution procedure to aid initial nuclear forensics investigations of chemically refractory compounds and particles prior to gamma spectrometry

Rapid and reliable assaying of Tc-99 in sediment samples with novel MTPN polymeric resin

Prompt digestion and HPIC separation of rare earth elements in surrogate post-detonation debris material with detection by ICP-MS and gamma spectroscopy

Rapid and Complete Digestion of Refractory Geological Samples Using Ultrafine Powder for Accurate Analyses of Trace Elements

A new rapid treatment of human hair for elemental determination by inductively coupled mass spectrometry

Substituting HF by HBF4- an optimized digestion method for multi-elemental sediment analysis via ICP-MS/MS

Multielemental analyses of isomorphous Indian garnet gemstones by XRD and external pixe techniques

Development of a simple and efficient two-step microwave-assisted digestion method for the determination of REEs, HFSEs and other elements in granite samples by ICP-OES

Determination of rare earth elements in ferrocarbonatite using ICP-AES and ICP-MS

Phosphonic Acid-Functionalized MIL-53(Al) As an Efficient Sorbent for Trace Rare Earth Elements Preconcentration, Storage and Their Determination by X-ray Fluorescence Spectrometry

Microprobe Analysis of Ferric Iron in Garnet: the Flank Method and Case Application

Optimization of Lithium Metaborate Fusion and Post-ultrasonic Extraction for Multi-element Determination in Graphite by ICP-AES

Optimization of external (in air) particle induced gamma-ray emission (PIGE) methodology for rapid, non-destructive, and simultaneous quantification of fluorine, sodium, and phosphorus in nuclear waste immobilization matrices

A Case Study Targeting K Fertilizer Chemical Synthesis With Complete Valorization Of Extraction By-Products As An Option

Simultaneous quantification of low Z elements in phosphorus containing alkali borosilicate glass samples by in situ Current normalized external (in air) PIGE method utilizing proton beam from FOTIA

A simplified instrumental protocol for trace Nd and Hf isotope measurements (<10 ng) using a MC-ICP-MS and an Apex Omega de-solvating system

Rapid Separation of Lu-Hf and Sm-Nd from A Single Rock Dissolution and Precise Measurement of Hf-Nd Isotopic Ratios for National Rock Standards