Abstract:In ITER, pellets are calculated to require more than 8 times the mass than currently planned to reliably trigger ELMs. Unmitigated heat flux impulses from edge-localized modes (ELMs) are intolerable in ITER at full power and current. Therefore, ITER operation relies on multiple approaches to control ELM heat fluxes. One method is pellet ELM pacing to instigate small rapid ELMs with low heat flux. Predicting the performance of pellet pacing is critical for ITER, which is expected to operate in a regime with a low-collisionality, peeling-limited pedestal. However, to trigger ELMs the local pressure increase in the expanding pellet cloud pushes the equilibrium over the ballooning stability limit. In this work, linear and nonlinear M3D-C1 simulations are used to predict pellet mass thresholds in DIII-D discharges and ITER scenarios with peeling-limited pedestals. It is found that the distance of the equilibrium's operational point from the ballooning branch of the pedestal stability boundary strongly changes thresholds. Linear M3D-C1 simulations find a strong dependence of the pellet mass threshold on the poloidal injection location for ITER's 15 MA, Q=10 scenario. The required pellet mass at the planned injection locations is 8 to 17 times larger than currently considered. However, such linear simulations do not include pellet ablation physics or time evolution of density and temperature. A new scheme of 2D nonlinear simulations, coupled with linear stability analysis at various steps throughout the nonlinear time evolution, was developed to include such physics and improve on the linear results. These new nonlinear-to-linear simulations confirm previous findings. This result suggests that pellet ELM triggering in ITER could require pellets much larger than those currently planned, which makes ELM-pacing operationally challenging. On the other hand, fueling pellets injected from the high-field side will likely not unintentionally trigger ELMs in an otherwise ELM-stable plasma.

The pellet rocket effect in magnetic confinement fusion plasmas

Pellet Enhanced Performance on the Hl-2a Tokamak

Propagation Dynamics Associated with Resonant Magnetic Perturbations Field in H-mode Plasmas

Drift of ablated material after pellet injection in a tokamak

Modeling of carbon pellets disruption mitigation in an NSTX-U plasma

Near-field simulations of pellet ablation for disruptions mitigation in tokamaks

Pellet fuelling of plasmas with ELM mitigation by resonant magnetic perturbations in MAST

Impact of breech geometry and propellant flow on the release of large pellets for the ITER disruption mitigation system

Lagrangian particle model for 3D simulation of pellets and SPI fragments in tokamaks

Hollow pellet injection for magnetic fusion

Parallel expansion of a fuel pellet plasmoid

Magnetization around mix jets entering inertial confinement fusion fuel

Collisionless shock acceleration in the corona of an inertial confinement fusion pellet with possible application to ion fast ignition

Prediction of pellet mass thresholds for ELM triggering in low-collisionality, ITER-like discharges

Issues in Formation of Cryogenic Pellets for Fusion Applications

Dispersive shell pellet injection modeling and validation for DIII-D disruption mitigation

Multi-pellet injection into the NBI-heated phase of TJ-II plasmas

Pellet fuelling with edge-localised modes controlled by external magnetic perturbations in MAST

Multiple-isotope pellet cycles captured by turbulent transport modelling in the JET tokamak

Erosion enhancement by impurity entrainment in the highly collisional plasmas of Magnum-PSI