Abstract:In ITER, pellets are calculated to require more than 8 times the mass than currently planned to reliably trigger ELMs. Unmitigated heat flux impulses from edge-localized modes (ELMs) are intolerable in ITER at full power and current. Therefore, ITER operation relies on multiple approaches to control ELM heat fluxes. One method is pellet ELM pacing to instigate small rapid ELMs with low heat flux. Predicting the performance of pellet pacing is critical for ITER, which is expected to operate in a regime with a low-collisionality, peeling-limited pedestal. However, to trigger ELMs the local pressure increase in the expanding pellet cloud pushes the equilibrium over the ballooning stability limit. In this work, linear and nonlinear M3D-C1 simulations are used to predict pellet mass thresholds in DIII-D discharges and ITER scenarios with peeling-limited pedestals. It is found that the distance of the equilibrium's operational point from the ballooning branch of the pedestal stability boundary strongly changes thresholds. Linear M3D-C1 simulations find a strong dependence of the pellet mass threshold on the poloidal injection location for ITER's 15 MA, Q=10 scenario. The required pellet mass at the planned injection locations is 8 to 17 times larger than currently considered. However, such linear simulations do not include pellet ablation physics or time evolution of density and temperature. A new scheme of 2D nonlinear simulations, coupled with linear stability analysis at various steps throughout the nonlinear time evolution, was developed to include such physics and improve on the linear results. These new nonlinear-to-linear simulations confirm previous findings. This result suggests that pellet ELM triggering in ITER could require pellets much larger than those currently planned, which makes ELM-pacing operationally challenging. On the other hand, fueling pellets injected from the high-field side will likely not unintentionally trigger ELMs in an otherwise ELM-stable plasma.

Hollow pellet injection for magnetic fusion

Pellet Enhanced Performance on the Hl-2a Tokamak

Observation of MBI and pellet injection penetration on HL-2A

Impact of Impurity Mixture Gas Seeded by Supersonic Molecular Beam Injection on Edge-Localized Modes in the HL-2A Tokamak

A review of supersonic molecular beam injection for plasma fueling and physical studies in magnetic fusion devices

Plasma behaviour with hydrogen supersonic molecular beam and cluster jet injection in the HL-2A tokamak

Experimental study of injection depth and fuelling effects during supersonic molecular beam injection on the HL-2A tokamak

1 EX / P 3-21 Plasma Behavior with Hydrogen Supersonic Molecular Beam and Cluster Jet Injection in the HL-2 A Tokamak

Pellet fuelling of plasmas with ELM mitigation by resonant magnetic perturbations in MAST

Optimization of pellet design parameters to achieve deep fueling depth in EAST plasma with PAM code

Pellet fuelling with edge-localised modes controlled by external magnetic perturbations in MAST

Pellet-Injector Technology—Brief History and Key Developments in the Last 25 Years

Development of a precise size-controllable pellet injector for the detailed studies of ablation phenamena and mechanism

Prediction of pellet mass thresholds for ELM triggering in low-collisionality, ITER-like discharges

Hot Electron Transport and Heating in Dense Plasma Core by Hollow Guiding

Simulation study of deuterium pellet ablation and deposition in the EAST tokamak with HPI2 code

Fuel Pellet Alignment in Heavy-Ion Inertial Fusion Reactor

Axial magnetic field injection into thick, imploding liners

Issues in Formation of Cryogenic Pellets for Fusion Applications

Modeling of carbon pellets disruption mitigation in an NSTX-U plasma

Development of a high performance MagLIF target platform using high aspect ratio coated liners and low-mix laser preheat