Abstract:In ITER, pellets are calculated to require more than 8 times the mass than currently planned to reliably trigger ELMs. Unmitigated heat flux impulses from edge-localized modes (ELMs) are intolerable in ITER at full power and current. Therefore, ITER operation relies on multiple approaches to control ELM heat fluxes. One method is pellet ELM pacing to instigate small rapid ELMs with low heat flux. Predicting the performance of pellet pacing is critical for ITER, which is expected to operate in a regime with a low-collisionality, peeling-limited pedestal. However, to trigger ELMs the local pressure increase in the expanding pellet cloud pushes the equilibrium over the ballooning stability limit. In this work, linear and nonlinear M3D-C1 simulations are used to predict pellet mass thresholds in DIII-D discharges and ITER scenarios with peeling-limited pedestals. It is found that the distance of the equilibrium's operational point from the ballooning branch of the pedestal stability boundary strongly changes thresholds. Linear M3D-C1 simulations find a strong dependence of the pellet mass threshold on the poloidal injection location for ITER's 15 MA, Q=10 scenario. The required pellet mass at the planned injection locations is 8 to 17 times larger than currently considered. However, such linear simulations do not include pellet ablation physics or time evolution of density and temperature. A new scheme of 2D nonlinear simulations, coupled with linear stability analysis at various steps throughout the nonlinear time evolution, was developed to include such physics and improve on the linear results. These new nonlinear-to-linear simulations confirm previous findings. This result suggests that pellet ELM triggering in ITER could require pellets much larger than those currently planned, which makes ELM-pacing operationally challenging. On the other hand, fueling pellets injected from the high-field side will likely not unintentionally trigger ELMs in an otherwise ELM-stable plasma.

Pellet fuelling with edge-localised modes controlled by external magnetic perturbations in MAST

Pellet fuelling of plasmas with ELM mitigation by resonant magnetic perturbations in MAST

ELM Mitigation by Supersonic Molecular Beam Injection into the H-mode Pedestal in the HL-2A Tokamak

Microstability analysis of pellet fuelled discharges in MAST

Pellet refuelling of particle loss due to ELM mitigation with RMPs in the ASDEX Upgrade tokamak at low collisionality

Density Compensation with Pellet Fueling During ELM Suppression with N = 4 RMP on Metal-Wall EAST Tokamak

Comparing spontaneous and pellet-triggered ELMs via non-linear extended MHD simulations

Features of Spontaneous and Pellet-Induced ELMs on the HL-2A Tokamak

Edge Localized Mode Control Using N=1 Resonant Magnetic Perturbation in the East Tokamak

Chasing the multi-modal plasma response in MAST-U

Divertor heat fluxes and profiles during mitigated and unmitigated Edge Localised Modes (ELMs) on the Mega Amp Spherical Tokamak (MAST)

Nonlinear Simulation of Edge Localized Mode with Pressure Profile Modified by Pellet Injection Through a BOUT++ Three-Field MHD Model

Edge Localized Mode Suppression and Plasma Response Using Mixed Toroidal Harmonic Resonant Magnetic Perturbations in DIII-D

Numerical Simulation of Fueling Pellet Ablation and Transport in the EAST H-mode Discharge

Deuterium Pellet Fueling in Type-Iii ELMy H-mode Plasmas on EAST Superconducting Tokamak

Nonlinear Transition from Mitigation to Suppression of the Edge Localized Mode with Resonant Magnetic Perturbations in the EAST Tokamak.

Modelling of spatial structure of divertor footprints caused by edge-localized modes mitigated by magnetic perturbations

Modelling of Plasma Response to 3d External Magnetic Field Perturbations in East

Prediction of pellet mass thresholds for ELM triggering in low-collisionality, ITER-like discharges

Effect of Resonant Magnetic Perturbations Including Toroidal Sidebands on Magnetic Footprints and Fast Ion Losses in HL-2M

Hollow pellet injection for magnetic fusion