Abstract:Spontaneous mitigation of giant ELMs and appearance of grassy ELMs have been observed repeatedly at low pedestal collisionality ( νe,ped*∼0.15 ) in the high-power (P inj > 13 MW) hybrid scenario in DIII-D. Higher β p and higher q 95 appear to be beneficial to achieving the grassy ELM regime. The grassy ELM H-mode plasma shows high energy confinement performance (H 98y2 up to over 1.5) under the conditions of high neutral beam torque and high core rotation. The pedestal width appears to exceed the EPED1.0 model prediction by more than 50%. Pedestal stability analysis performed with the ELITE code indicates that the stability against low-n kink/peeling modes is improved with increased auxiliary heating power and the operational point in the grassy ELM regime is located near the ballooning boundary. The pedestal stability characteristics during the grassy ELM crashes have been investigated in comparison with the giant ELM crashes based on plasma profiles experimentally measured with high resolution and accuracy. It has been found that the underlying mechanism for the observed small-amplitude ELM crashes is mainly the expansion of the ballooning stability boundary induced by an initial radially localized collapse in the pedestal, which helps to stop the growth of instabilities and further collapse of the pedestal. The effect of electron density pedestal on mitigating edge localized instabilities has been analyzed by numerical simulation, suggesting that the electron density pedestal characterized by high n e,sep/n e,ped and low density gradient helps to stabilize peeling-ballooning modes because of a low pressure pedestal gradient and to lower the ballooning boundary mainly because of a low ion diamagnetic frequency in the pedestal region, thus triggering ballooning instabilities and producing the intrinsic grassy ELMs. Numerical simulation of the Chinese fusion engineering test reactor (CFETR) with the SOLPS code indicates that the separatrix density might be insensitive to the electron diffusivity in the pedestal region and increase with the power flowing from the core region to the edge region. Pedestal stability analysis suggests that the flat density pedestal with high separatrix density obtained in the high-power plasma in CFETR would make the operational point close to the ballooning boundary, which is considered to help destabilize ballooning instabilities and facilitate the access to the grassy ELM regime.

Simulation of triggering and evolution of ELM by pellet injection in EAST under BOUT++ framework

ELM Mitigation by Supersonic Molecular Beam Injection into the H-mode Pedestal in the HL-2A Tokamak

Nonlinear Simulation of Edge Localized Mode with Pressure Profile Modified by Pellet Injection Through a BOUT++ Three-Field MHD Model

Comparing spontaneous and pellet-triggered ELMs via non-linear extended MHD simulations

Impact of Pedestal Density Gradient and Collisionality on ELM Dynamics

Elm Mitigation by Supersonic Molecular Beam Injection: Kstar and Hl-2a Experiments and Theory

Prediction of pellet mass thresholds for ELM triggering in low-collisionality, ITER-like discharges

Features of Spontaneous and Pellet-Induced ELMs on the HL-2A Tokamak

Observation of Enhanced Pedestal Turbulence During ELM Mitigation with Resonant Magnetic Perturbation on EAST

Inter-Elm Evolution of the Pedestal Structures in Type-I Elmy H-Mode Plasmas with Lhw and Nbi Heating on East

Dependence of ELM Instability on Separatrix Density in EAST Long-Pulse H-mode Plasmas

ELMy H-mode Linear Simulation with 3-Field Model on Experimental Advanced Superconducting Tokamak Using BOUT++

Pedestal dynamics prior to type-III ELM onset on HL-2A tokamak

Decoupling of peeling and ballooning thresholds of pedestal stability and reduction in ELM frequency via enhanced turbulence with edge electron cyclotron heating in DIII-D

Physical Mechanisms for the Transition from Type-Iii to Large ELMs Induced by Impurity Injection on EAST

Numerical simulation of the effect of pellet injection on ELMs

Investigation of the Dithering-Like Cycles Induced by Deuterium Pellet Injection During ELMy H-mode Plasmas on EAST

The Simulation of ELM Suppression by Ion Cyclotron Resonance Heating in EAST Using BOUT++

Observation of a Fully Non-Inductive H-mode Regime Dominated by the Sporadic-Small Edge-Localized Modes in EAST with a Tungsten Divertor

Type-I ELM Mitigation by Continuous Lithium Granule Gravitational Injection into the Upper Tungsten Divertor in EAST

Grassy ELM Regime at Low Pedestal Collisionality in High-Power Tokamak Plasma