Abstract:In ITER, pellets are calculated to require more than 8 times the mass than currently planned to reliably trigger ELMs. Unmitigated heat flux impulses from edge-localized modes (ELMs) are intolerable in ITER at full power and current. Therefore, ITER operation relies on multiple approaches to control ELM heat fluxes. One method is pellet ELM pacing to instigate small rapid ELMs with low heat flux. Predicting the performance of pellet pacing is critical for ITER, which is expected to operate in a regime with a low-collisionality, peeling-limited pedestal. However, to trigger ELMs the local pressure increase in the expanding pellet cloud pushes the equilibrium over the ballooning stability limit. In this work, linear and nonlinear M3D-C1 simulations are used to predict pellet mass thresholds in DIII-D discharges and ITER scenarios with peeling-limited pedestals. It is found that the distance of the equilibrium's operational point from the ballooning branch of the pedestal stability boundary strongly changes thresholds. Linear M3D-C1 simulations find a strong dependence of the pellet mass threshold on the poloidal injection location for ITER's 15 MA, Q=10 scenario. The required pellet mass at the planned injection locations is 8 to 17 times larger than currently considered. However, such linear simulations do not include pellet ablation physics or time evolution of density and temperature. A new scheme of 2D nonlinear simulations, coupled with linear stability analysis at various steps throughout the nonlinear time evolution, was developed to include such physics and improve on the linear results. These new nonlinear-to-linear simulations confirm previous findings. This result suggests that pellet ELM triggering in ITER could require pellets much larger than those currently planned, which makes ELM-pacing operationally challenging. On the other hand, fueling pellets injected from the high-field side will likely not unintentionally trigger ELMs in an otherwise ELM-stable plasma.

Numerical simulation of the effect of pellet injection on ELMs

On the mechanism for edge localized mode mitigation by supersonic molecular beam injection

ELM Mitigation by Supersonic Molecular Beam Injection into the H-mode Pedestal in the HL-2A Tokamak

Pellet Enhanced Performance on the Hl-2a Tokamak

Overview of the Recent Study on ELM Mitigation Physics with Different External Actuators on HL-2A Tokamak

Elm Mitigation by Supersonic Molecular Beam Injection: Kstar and Hl-2a Experiments and Theory

Comparing spontaneous and pellet-triggered ELMs via non-linear extended MHD simulations

Simulation of triggering and evolution of ELM by pellet injection in EAST under BOUT++ framework

Experimental study of elm control by varying toroidal rotation with ctr-nbi on east d

Prediction of pellet mass thresholds for ELM triggering in low-collisionality, ITER-like discharges

Pellet fuelling of plasmas with ELM mitigation by resonant magnetic perturbations in MAST

Features of Spontaneous and Pellet-Induced ELMs on the HL-2A Tokamak

Decoupling of peeling and ballooning thresholds of pedestal stability and reduction in ELM frequency via enhanced turbulence with edge electron cyclotron heating in DIII-D

Effect of the neutral beam injector operational regime on the Alfven eigenmode saturation phase in DIII-D plasma

Pellet fuelling with edge-localised modes controlled by external magnetic perturbations in MAST

Hollow pellet injection for magnetic fusion

Modeling of the ECCD injection effect on the Heliotron J and LHD plasma stability

Effect of injection conditions on the non-linear behavior of the ECDI and related turbulent transport

Exploring the effect of ELM and code-coupling frequencies on plasma and material modeling of dynamic recycling in divertors

Numerical Simulation of Plasma Plume with an Insulated Wall in Sheath Region Using a DSMC-PIC Parallel Algorithm

Dispersive shell pellet injection modeling and validation for DIII-D disruption mitigation