Abstract:Scanning Thermal Microscopy (SThM) is one of the most universal methods for probing heat conductivity, interfacial thermal resistance and local temperature of materials and devices with nanoscale resolution. SThM uses a temperature sensitive heated probe with an apex of lateral dimensions ranging from a micrometre down to few nanometers that can contact a studied material or a nanoscale device at an arbitrary point on its surface. The tip-sample contact results in a heat flow from the heated tip to the sample - Qts that reduces a heater temperature Th, that is constantly monitored using a sensitive electronic circuit. SThM primary output signal is the heat flow Qts or a closely related parameter - total heater-sample thermal conductance Gts = Qts/(Th-Ts) where Ts is the temperature of the sample. As the tip scanned in a raster way across the sample surface, SThM output produces “thermal” maps reflecting spatial variations in the local sample thermal conductivity ks with the lateral resolution down to a few nanometers (1). A major challenge is the quantitative interpretation of SThM “thermal” signal as ks is fundamentally entangled with the tip-sample interfacial thermal conductance gif that directly depends on the geometry of the tip-surface contact, a generally unknown value that can also vary significantly during SThM measurements. In this paper we describe three linked approaches that allow to eliminate major variabilities in the SThM measurements as well as produce quantitative measurements of nanoscale thin layers of materials. First, we control the temperature of the sample Ts and the microscope base Tm via actively controlled Peltier heating/cooling elements with ~10 mK precision significantly improving the reproducibility of SThM signal by approximately 10 fold. Secondly, we use simultaneous measurement of shear forces and heat flow between the probe (2). As shear forces directly proportional to the contact area, the correlation observed allowed us to confirm the true ballistic nature of heat transport via nanoscale contacts in such a system, suggesting that even large – sub-micrometer sized contacts are composed by a multiple nanoscale junctions with the size below the mean-free-path of the heat carriers. Shear forces SThM allowed us to eliminate dependence of the SThM output on the most difficult to determine parameter – tip-surface contact geometry. Finally, we present a new paradigm of measurement of thermal conductance in the nanoscale thin layers of materials by producing a nanoscale cross-section of the material or device via SPM-friendly Ar ion polishing producing near-atomically low-angle wedge-shaped flat sections (3), followed by the SThM measurements of total thermal conductance Gts as a function of the wedge thickness t. The decrease of the thermal conductance as a function of edge thickness dGts/dt allows to exclusively determine thermal conductivity of the sample kts, eliminating necessity to know either the tip-sample interfacial thermal conductance gif or layer-substrate thermal conductance, two notoriously unknown parameters that render majority of SThM measurements to be merely qualitative.

Scanning Thermal Microscopy in Air and Vacuum: A Comparison

Near-field heat transfer in a scanning thermal microscope

Quantitative Thermal Imaging of Single-Walled Carbon Nanotube Devices by Scanning Joule Expansion Microscopy.

Thermomechanical Modeling of Scanning Joule Expansion Microscopy Imaging of Single-Walled Carbon Nanotube Devices

Electron Thermal Microscopy

Nanoscale thermometry under ambient conditions via scanning thermal microscopy with 3D scanning differential method.

Frequency domain measurements of thermal properties using 3omega-Scanning Thermal Microscope in a vacuum environment

Total-Ionizing-Dose Effects on Al/SiO2 Bimorph Electrothermal Microscanners

Calibrated Microwave Reflectance in Low-Temperature Scanning Tunneling Microscopy

Monte Carlo Comparisons to a Cryogenic Dark Matter Search Detector with low Transition-Edge-Sensor Transition Temperature

Measurements of nanoscale thermal properties of materials via Scanning Thermal Microscopy (SThM):Challenges and solutions

Scanning Tunneling Thermometry

Measuring scattering distributions in scanning helium microscopy

Understanding the resolution and sensitivity in photothermal nanoscale chemical imaging - a point spread function approach

Nanoscale resolution immersion scanning thermal microscopy

Nanoscale spatial resolution probes for Scanning Thermal Microscopy of solid state materials

Thermal Properties of Materials Characterized by Scanning Electron-Acoustic Microscopy

Scanning thermal microscopy and its applications for quantitative thermal measurements

Nanosecond nanothermometry in an electron microscope

A comparative investigation of thickness measurements of ultra-thin water films by scanning probe techniques