Abstract:Heat-pipe microreactors (HPMRs) are very small-scale nuclear reactors that employ heat pipes (HPs) for heat removal. HPMRs can be easily integrated with other forms of renewable energies, can be used for emergency responses to disaster relief zones, can be deployed in remote locations not connected to the grid, and can be removed from sites and replaced by new ones. HPMRs can also be used for space missions as HPs do not rely on gravity for heat transfer. Conventional fuel materials, such as uranium oxide (UO 2 ) and uranium oxycarbide (UCO), are currently considered in most existing HPMR designs, but ceramic uranium nitride (UN) fuel that has high uranium density, high thermal conductivity, and high melting point may become a better fuel candidate. Through neutronics calculations, this paper assesses the impact of using UN fuel in HPMRs with two different neutron spectra (fast and thermal) and two different fuel forms [traditional solid fuel pellets and TRi-structural-ISOtropic (TRISO) fuel compacts]. It was concluded that retrofitting HPMRs with UN fuel has the potential to reduce the initial 235 U enrichment requirement by ~3 wt% (to keep the same cycle length) or increase the cycle length (by keeping the same initial 235 U enrichment), which enables more compact and transportable HPMR core designs. However, using UN fuel decreases the control element worth [by up to 20% for the Special Purpose Reactor (SPR) and 5% for HP-MR] and is up to 80% more costly. Increasing 15 N enrichment can further decrease the initial 235 U enrichment requirement and increase the control element worth but is more costly. Compared to fast-spectrum HPMRs fueled with solid pellet fuels, retrofitting UN fuel is more suitable for thermal-spectrum HPMRs fueled with TRISO fuel compacts, where the neutron spectrum hardening caused by using UN is less significant.

On the practicalities of producing a nuclear weapon using high-assay low-enriched uranium

The weapons potential of high-assay low-enriched uranium

Neutronic analysis of high burnup thorium-HALEU fuels in PHWR

HYDROXYLAMINE DERIVATIVE IN PUREX PROCESS. VI. STUDY ON THE PARTITION OF URANIUM/NEPTUNIUM AND URANIUM/PLUTONIUM WITH N,N-DIETHYLHYDROXYLAMINE IN THE PURIFICATION CYCLE OF URANIUM CONTACTOR

A review of nuclear electric fission space reactor technologies for achieving high-power output and operating with HALEU fuel

Depleted-Uranium Weapons: the Whys and Wherefores

Why Only U-235 and Pu-239? Classroom-Level Graphs for Understanding Heavy-Element Weaponizability Factors

Comments on the Frisch-Peierls Estimate of the Critical Mass of a Uranium Fission Bomb

Calculation of the cost of enriched uranium products in multi-stream cascades of enrichment process

Possibility assessment for production of non-traditional nuclear fuel in thorium blanket of hybrid thermonuclear reactor

Improving the Utilization of Nuclear Resources

Extraction of Neptunium, Plutonium, Americium, Zirconium, and Technetium by Di-(2-Ethylhexyl)-Iso-Butyramide (DEHiBA) at High Metal Loadings

Measuring Very Low Radiation Doses in PTFE for Nuclear Forensic Enrichment Reconstruction

Assessing the Risk of Proliferation via Fissile Material Breeding in ARC-class Fusion Power Plants

The Use of High-Density UN Fuel in Heat-Pipe Microreactors

Verification of uranium composite materials using active interrogation techniques for safeguards purposes

Neutron-Physical and Radiation Characteristics of Different Low Enrichment Fuels (Thorium and Uranium) in a Proposed JRTR Research Reactor

Production of Pa-U Fuel with Proliferation Resistance by 14 MeV Neutron for Long-life Core

Development of LEU-based targets for radiopharmaceutical manufacturing: A review

Toxicity of irradiated advanced heavy water reactor fuels

Methodology for Multiparameter Evaluation of Barriers Against Proliferation of Minor Actinides